Overview
The Warn 60165 is a set of premium manual locking hubs with a universal fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Warn presents the premium hub as a no-compromise design for the hardcore off-roader or truck owner who wants industry-standard performance. The hub is all metal, topped by a zinc aluminum alloy dial intended to work reliably for years. To engage, the dial takes a full 9/10ths of a turn so that the inner drive gear seats on the clutch ring.
Once engaged, a thick internal wave spring and heavy dial detents keep the hub locked. The hub carries a lifetime limited warranty and is built for hard use.
Hub compatibility should be verified rather than assumed. Check the spline count, axle diameter and wheel mounting against your axle before installation.
The emphasis on strength and a full 9/10ths of a turn engagement points to a hub for drivers who want a positive, deliberate lock rather than an automatic one.
Key features
- Premium manual locking hubs
- All metal construction
- Zinc aluminum alloy dial
- Dial turns a full 9/10ths of a turn to engage
- Thick wave spring and heavy detents hold engagement
- Lifetime limited warranty
Choosing the right hub setup
Manual locking hubs connect the front wheels to the axle shafts only when the driver chooses to lock them. Engaging the hub on a four-wheel-drive vehicle lets the front axle share drive, and disengaging it lets the wheels spin freely, which reduces drag and wear on the front driveline during highway driving. The dial design on this hub suits drivers who prefer a deliberate, positive lock over an automatic system.
Before buying, match the hub to the axle rather than to the wheel alone. Spline count, axle shaft diameter and hub mounting style all need to agree with the parts already on the truck. Hubs are often replaced in pairs, and worn axle seals, bearings or a damaged clutch ring can affect how the new hub engages, so inspect those parts while the wheel end is open.
After installation, check engagement at both ends of the dial travel and listen for drag or grinding when the wheels turn. Recheck the hub after the first few trail runs, since new gaskets and bearings can settle. Keep the dial clean and free of grit so it turns smoothly.
- Confirm spline count and axle diameter before ordering
- Inspect the clutch ring and wave spring when the hub is open
- Recheck hub engagement after the first trail runs
Specifications
| Brand | Warn |
|---|---|
| Part number | 60165 |
| UPC | 1274860165 |
| Product type | Premium manual locking hubs |
| Construction | All metal |
| Dial | Zinc aluminum alloy |
| Engagement | 9/10ths of a turn |
| Warranty | Lifetime limited |
| Fit type | Universal fit, no vehicles named |
Vehicle fitment
The 60165 is a universal fit with no specific vehicles identified. Confirm fit for your axle’s spline count and wheel hub style before ordering.
Hub compatibility depends on axle spline count and wheel hub style. Confirm fit for your vehicle’s year, model and trim before choosing the 60165.
Installation notes
Locking hubs sit at the wheel end, so correct bearing preload matters after installation. Confirm the fit for your vehicle before taking the vehicle apart.









