Overview
The Power Trax 9201202900 is a no-slip traction differential for AMC 20 axles with 29 splines, made for rear or front location. No-Slip systems pair the smooth operation of a limited-slip differential with the traction of a locking differential.
A synchronization mechanism is said to eliminate the ratcheting sounds typical of other locking designs. No vehicle models are named, so match the AMC 20 axle type and spline count to your housing.
Key features
- Combines limited-slip smoothness with locking-differential traction
- Synchronization mechanism said to eliminate ratcheting noise
- No ring and pinion setup required for installation
- No special tools or oils needed, per the manufacturer
- Automatic locker design for AMC 20 axles with 29 splines
Installing and maintaining
A no-slip differential aims to combine the quiet, smooth behavior of a limited-slip unit with the grip of a locker. On the trail it sends drive to the wheel that has traction, and on pavement it should feel closer to an open axle. The synchronization design is meant to limit the ratcheting sound that many lockers make in turns.
Because the axle carries the load, the housing, cover and fluid should be checked at the same time as the differential goes in. Remove the old unit cleanly, inspect the carrier for metal debris, and fit the new one with the correct axle fluid. Pulling a differential is heavy work, so support the axle and keep the wheels off the ground.
Over time, watch for leaks around the cover and for changes in how the vehicle tracks under power. A new sound or a grab in tight turns is a reason to stop and inspect the unit before more driving.
Specifications
| Brand | Power Trax |
|---|---|
| Part number | 9201202900 |
| UPC | 662960011627 |
| Axle type | AMC 20 |
| Axle location | Rear or front |
| Axle spline | 29 splines |
| Differential type | Automatic locker |
| Case style | Open case |
| Axle manufacturer | AMC |
Vehicle fitment
No vehicle is named here. Power Trax lists universal fit for AMC 20 axles, rear or front, with 29 splines.
Verify the AMC 20 axle type and spline count on your housing before choosing this unit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Power Trax says no ring and pinion setup, special tools or oils are needed. Pulling and refitting a differential is heavy work, so hire a shop unless you have axle experience.
What’s included
Check the included items against your installation before starting, including any hardware you need.









