Overview
The Power Stop Performance Brake Calipers S3338 (part number PSTS3338) are remanufactured front brake calipers for the Nissan Armada and Titan, the Titan XD, and the INFINITI QX56 and QX80.
Power Stop Performance Brake Calipers are aimed at enthusiasts: they bolt directly in place of the stock calipers and look good behind stock or custom wheels.
The caliper and bracket are remanufactured in the Chicago, IL facility and finished in a high-temperature red powder-coat. New premium boots and seals are fitted, and the caliper pins are lubricated with high-temperature silicone.
Key features
- Bolt-in replacement for the stock front calipers
- Caliper and bracket remanufactured in Power Stop’s Chicago, IL facility
- High-temperature red powder-coat
- New premium boots and seals
- High-temperature silicone lubricant on the caliper pins
- Premium abutment clips included where applicable
Before you bleed and install
A remanufactured caliper arrives ready to bolt on, but the job still needs care. Check the brake hose connection and bracket bolts before tightening. Work on one wheel at a time so the other side remains a reference for correct height and alignment.
Bleeding removes air from the lines so the pedal feels firm. Start with the bleeder farthest from the master cylinder and work toward the nearest one. Keep the reservoir topped up during bleeding so air is not drawn back into the system. Use fresh fluid of the grade your vehicle requires.
Pad and rotor choice also affects how the caliper performs. Replace pads on the same axle at the same time, and inspect the rotor for scoring before fitting. Keep the caliper pins clean and moving freely during later brake services.
- Torque bracket bolts to the specification in your service manual
- Do not let the hose twist after installation
- Test the pedal in a safe area before driving
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTS3338 |
| Product type | Remanufactured brake calipers |
| Position | Front |
| Finish | High-temperature red powder-coat |
| Fit | Direct fit |
Vehicle fitment
It fits the 2006–2013 INFINITI QX56, the 2014–2019 INFINITI QX80, the 2006–2015 and 2017–2024 Nissan Armada, the 2008–2015 and 2017–2024 Nissan Titan and the 2017–2018 Nissan Titan XD. Model year 2016 falls outside the Armada and Titan fit.
Check your year carefully, since 2016 falls outside the Armada and Titan fit and the Titan XD fits only 2017–2018. Match your model year to this fit before ordering.
Installation notes
Replacing a caliper opens the hydraulic system, so the brakes must be bled before the vehicle is driven.
What’s included
Front brake calipers with brackets, with premium abutment clips where applicable.
Not included: Brake pads, rotors and brake fluid.








