Overview
The Power Stop K1944-36 Heavy Duty Truck and Tow Brake Kit is a Z36 Truck and Tow drilled and slotted brake kit without calipers for the 2004-2008 Ford F-150 and the 2006-2008 Lincoln Mark LT. It covers the front and rear positions.
The kit includes slotted and cross-drilled rotors and Z36 high-friction metallic pads. It is aimed at heavy-duty braking, including wet, hot and hilly conditions and towing at maximum weight. The rotors are coated.
The kit does not include brake lines or calipers. The F-150 list covers the FX4, Harley-Davidson Edition, King Ranch, Lariat, STX, THE 60TH ANNIVERSARY EDITION, XL and XLT trims, and the Mark LT list covers the Base trim.
Key features
- Slotted and cross-drilled rotors
- Power Stop Z36 high-friction metallic pads
- Coated rotors
- Front and rear brake kit
- Designed for truck and tow use
- Does not include calipers or brake lines
- Direct fit
Four-wheel job planning
A four-wheel brake job takes longer than a single axle, so set aside time and a clean workspace before starting. Support the truck properly and keep the parts in order so the left and right sides stay matched. Work through one corner at a time to avoid mixing up hardware.
Coated rotors keep surface rust down while parts sit outside, and Z36 metallic pads handle heat well under heavy use. Slotted and cross-drilled rotors vent heat and shed water, though they wear pads faster than plain rotors. Ceramic pads offer a quieter option for daily driving, but this kit uses metallic compounds.
After the install, check the brake fluid level and look for leaks at every connection. Test pedal feel at low speed before taking the truck onto highways. Keep an eye on the first few stops for pulling or vibration.
- Keep parts sorted by corner
- Check fluid level after the install
- Test pedal feel at low speed
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1944-36 |
| UPC | 792088565303 |
| Product type | Disc brake pad and rotor kit |
| Kit | Z36 Truck and Tow |
| Rotor type | Slotted and cross drilled |
| Rotors coated | Yes |
| Pads | Z36 high-friction metallic |
| Position | Front and rear |
| Brake lines | Not included |
| Calipers | Not included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2004-2008 Ford F-150 in the FX4, Harley-Davidson Edition, King Ranch, Lariat, STX, THE 60TH ANNIVERSARY EDITION, XL and XLT trims, and the 2006-2008 Lincoln Mark LT in its Base trim.
It covers the F-150 from 2004 to 2008 and the Mark LT from 2006 to 2008 only. Other F-150 years and other Ford trucks are not covered. Check your year, model and trim against this range before buying.
Installation notes
Brake components are safety-critical, so professional installation is strongly recommended. Support the vehicle on rated jack stands on level ground and never work under a vehicle held only by a jack.
- Tighten all fittings and fasteners to the torque values for your vehicle and check for leaks.
- Bleed the brakes using the method for your vehicle and confirm a firm pedal before driving.
- Re-check fittings after the first miles of driving, and bed in new pads and rotors using the standard procedure for your vehicle.
What’s included
- Slotted and cross-drilled rotors, coated
- Power Stop Z36 high-friction metallic pads
Not included: calipers and brake lines.








