Overview
The Power Stop K1905-36 is a front Heavy Duty Truck and Tow brake kit for the 2000–2005 Ford Excursion and the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty. In the box are slotted and cross-drilled rotors and Z36 high-friction metallic pads, but not calipers.
The kit is designed as heavy-duty braking for trucks, meant to improve braking capability in wet, hot and hilly conditions or when towing at maximum weight. Rotors are coated, brake lines are not included, and the fitment type is direct fit. Drilled rotors have holes through the friction face, slotted rotors have grooves, and the K1905-36 uses both patterns. The rear kit for the same trucks is the K1890-36, and the front and rear kit is the K1906-36, so position is the main difference between the three.
Key features
- Front brake kit for the Excursion and two Super Duty pickups.
- Coated slotted and cross-drilled rotors.
- Z36 high-friction metallic pads.
- Power Stop aims the Z36 line at heavy-duty and towing use.
- Neither calipers nor brake lines are in the kit.
Front brakes for towing
The front brakes on a heavy truck do much of the stopping, especially when descending a grade with a trailer or heavy load. Heat builds quickly at the front, and worn or glazed pads will lose grip. A front kit with a high-friction metallic pad and slotted, cross-drilled rotors is aimed at repeated hard use, though metallic pads can produce more noise and dust than softer compounds.
Front rotors and pads should be replaced together, and the caliper slide pins and hardware clips should be checked for free movement. Look for uneven rotor thickness, pulsing in the pedal, or a pull to one side after the job. Keep the front wheel bearings and tie rod ends in good condition, since play in those parts can affect how evenly the brakes work.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1905-36 |
| UPC | 792088565006 |
| Product type | Heavy duty truck and tow brake kit without calipers |
| Brake position | Front |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2000–2005 Ford Excursion, the 1999–2004 Ford F-250 Super Duty and the 1999–2004 Ford F-350 Super Duty.
- 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS, XLT)
- 1999–2004 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
- 1999–2004 Ford F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
Years outside the listed ranges, such as a 2005 Super Duty, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The K1905-36 is front only. Replace the front rotors and pads together, and keep the calipers and brake lines already on the truck.
What’s included
The K1905-36 contains slotted and cross-drilled rotors and Z36 high-friction metallic pads for the front axle.
Not included: Calipers and brake lines.









