Overview
The Power Stop K1906-36 is a front and rear Heavy Duty Truck and Tow brake kit for the 2000–2005 Ford Excursion and the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty. It combines slotted and cross-drilled rotors with Z36 high-friction metallic pads for both axles, without calipers.
The kit is built for heavy-duty braking on trucks, aimed at wet, hot and hilly conditions and towing at maximum weight. The rotors are coated, brake lines are left out and it is a direct fit. A drilled rotor has holes through its friction face and a slotted rotor has grooves cut across it, and the K1906-36 uses both. The Excursion and the Super Duty pickups share this kit, though their year ranges differ. Compared with the K1906, which has no vehicle attached and uses ceramic pads, this version has Z36 metallic pads and a vehicle fit.
Key features
- Front and rear coverage for the Excursion and two Super Duty pickups.
- Coated rotors with a slotted and cross-drilled pattern.
- Z36 high-friction metallic pads.
- Power Stop aims the Z36 line at heavy-duty and towing use.
- No calipers and no brake lines in the kit.
Towing and heavy-duty use
Heavy-duty braking is mostly about heat management. A truck carrying cargo or pulling a trailer builds up more energy on each stop, so the pads and rotors work harder and heat faster than they do on a light vehicle. Friction material and rotor design both affect how well the system copes with long downhill runs.
Front and rear kits suit owners who want the whole truck handled in one job. Balanced front and rear wear helps the vehicle stop straight under load. Cross-drilled and slotted rotors can help shed water and gas, but any pattern that removes material needs periodic thickness checks.
Brake fluid, hoses and calipers all share the load with new parts. Look for fluid that has darkened, hoses that have swelled and calipers that drag. Replacing worn hardware at the same time avoids uneven pad contact on fresh rotors.
- Check brake fluid colour and moisture level
- Inspect hoses for swelling or cracks
- Replace worn caliper hardware during the job
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1906-36 |
| UPC | 792088565013 |
| Product type | Heavy duty truck and tow brake kit without calipers |
| Brake position | Front and rear |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2000–2005 Ford Excursion, the 1999–2004 Ford F-250 Super Duty and the 1999–2004 Ford F-350 Super Duty, in the trims shown below.
- 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS, XLT)
- 1999–2004 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
- 1999–2004 Ford F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
Super Duty years after 2004 and Excursion years outside 2000–2005 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The K1906-36 includes parts for both axles, so each axle’s rotors and pads are replaced together. The existing calipers and brake lines stay with the vehicle.
What’s included
The K1906-36 contains slotted and cross-drilled rotors and Z36 high-friction metallic pads for the front and rear axles.
Not included: Calipers and brake lines.









