Overview
The Power Stop K2164-36 is a Z36 Truck and Tow brake kit for front and rear brake positions on the 2011-2018 Ram 1500, 2006-2010 Dodge Ram 1500, 2007-2009 Durango and Aspen. It includes slotted and cross-drilled rotors and Z36 high-friction metallic pads.
It supplies slotted and cross-drilled rotors and Z36 high-friction metallic pads, without calipers. The kit fits both the Dodge and the later Ram badges, covering a long run of production years. The Z36 range is designed to improve braking while towing at maximum weight.
Key features
- Kit for 2006-2018 Ram 1500
- Also 2007-2009 Dodge Durango and Chrysler Aspen
- Front and rear position
- Slotted and cross-drilled coated rotors
- Z36 pads
Towing and braking load
Towing at or near maximum weight puts far more heat into the brakes than everyday driving, and that heat is where many brake problems begin. Rotors can warp or glaze when they run hot for long periods, and pads can fade when they are pushed past their limits. Choosing parts built for heavy use helps, but the rest of the system matters just as much, especially on a full-size pickup with a loaded trailer behind it.
Because this kit reuses the original calipers, the calipers deserve a close look before installation. A caliper that sticks on its slide pins can keep one side dragging, which overheats the rotor and wears the pad unevenly. Keep the brake fluid fresh, since old fluid absorbs moisture and boils at lower temperatures under heavy use.
- Inspect caliper pistons and slide pins before fitting
- Replace brake fluid if it is dark or old
- Bed in the new pads before towing
- Check the wheel fasteners after the first trail runs
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K2164-36 |
| UPC | 792088566287 |
| Product type | Truck and tow brake kit, without calipers |
| Series | Z36 Truck and Tow |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic |
| Brake position | Front and rear |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Power Stop lists K2164-36 for the 2007-2009 Chrysler Aspen, 2007-2009 Dodge Durango, 2006-2010 Dodge Ram 1500 and 2011-2018 Ram 1500.
The list stretches across two Ram generations and two SUVs, the Durango and the Aspen. The 2006-2010 Dodge Ram 1500 and the 2011-2018 Ram 1500 are separate lines in the list, so each carries its own range of years.
Ram 2500 and 3500 models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Calipers are not included, so the original calipers are reused. The kit is direct fit, and brake lines are not part of it.
What’s included
Power Stop supplies slotted and cross-drilled rotors along with Z36 high-friction metallic pads in this kit.
Not included: The kit comes without calipers, and brake lines are not part of it.








