Overview
The Power Stop K1890-36 is a rear Heavy-Duty Z36 Truck and Tow brake kit for the 2000–2005 Ford Excursion and the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty. Its parts are slotted and cross-drilled rotors and Z36 high-friction metallic pads, with no calipers.
The Z36 kit is built for braking in wet, hot and hilly conditions and when towing at maximum weight. It has coated rotors, is a direct fit and comes without brake lines. The Excursion and the Super Duty pickups share one part number, but their year ranges differ: the Excursion runs 2000–2005 and the pickups 1999–2004. Cross-drilled rotors have holes through the friction face and slotted rotors have grooves, and the K1890-36 uses both.
Key features
- Rear kit for the Excursion and two Super Duty pickups.
- Slotted and cross-drilled coated rotors.
- Z36 high-friction metallic pads.
- Years run from 1999 to 2005 across the three models.
- No calipers or brake lines come with the kit.
Rear axle wear and towing
Rear brakes on a full-size pickup or SUV carry a large share of the work when the vehicle is loaded or towing downhill. Heat builds quickly in the rear rotors under those conditions, so pads and rotors can glaze if the vehicle is driven hard for long stretches. Matching pads and rotors as a set helps the rear axle hold steady performance.
Metallic pads tolerate heat well but produce more dust and can be harder on rotors than ceramic compounds. Coated rotors resist surface rust while the vehicle sits, which matters on trucks that work seasonally. Cross-drilled and slotted rotors help shed gas and water, though the cuts can wear pads faster.
Because the calipers stay in place, inspect them for sticking slides and leaking seals before fitting the new rotors. A seized caliper will wear one pad faster than the other and cause pulling under braking.
- Check rear caliper slide pins for smooth movement
- Inspect brake hoses for cracks
- Bed in the pads gradually before towing
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1890-36 |
| UPC | 792088564955 |
| Product type | Heavy duty Z36 truck and tow brake kit without calipers |
| Brake position | Rear |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2000–2005 Ford Excursion and the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty, in the trims given below.
- 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS, XLT)
- 1999–2004 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
- 1999–2004 Ford F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT)
Super Duty years outside 1999–2004 and Excursion years outside 2000–2005 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only the rear axle is involved when fitting the K1890-36. The rear rotors and pads are replaced together, and the existing calipers and lines are retained.
What’s included
The K1890-36 contains slotted and cross-drilled rotors and Z36 high-friction metallic pads for the rear axle.
Not included: Calipers and brake lines.









