Overview
The Power Stop K2152 is a front brake kit for the driver and passenger sides. It includes drilled and slotted 3 inch tall full cast rotors and Evolution Series ceramic brake pads.
The G3000 grade castings have 210 Brinell hardness and 250 MPa tensile strength. The rotor microstructure is a homogenous matrix of perlitic and graphite flakes. The pads are formulated to keep a high coefficient of friction above 1000 degrees, and the posi-mold pads are hot pressed at over 6,000 psi and are asbestos free.
Key features
- Front driver and passenger side rotors and pads
- 3 inch tall, full cast rotors
- Drilled and slotted rotor surface
- Evolution Series ceramic pads
- Posi-mold pads hot pressed at over 6,000 psi, asbestos free
- Zinc-dichromate plated to resist rust
Measuring rotor height
Rotor height is one of the quickest ways to confirm that a front kit will sit correctly. A rotor that is too short or too tall can change how the pad contacts the friction surface and how the caliper clears the hub. Measuring the existing rotor across its braking face, from hat to outer edge, before buying gives a practical comparison point.
Full cast rotors are heavier and solid, which many drivers prefer for stable heat handling in front brakes. Evolution Series ceramic pads pair well with cast rotors because they produce less dust and wear the rotor face evenly. Replace the front pads and rotors together so both sides brake the same way.
- Measure rotor height at the braking face before ordering
- Clean the hub face and remove rust before fitting
- Torque wheel lug nuts in a star pattern
- Check the caliper bracket bolts after the first drive
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K2152 |
| UPC | 792088528285 |
| Product type | Brake kit (drilled and slotted rotors with ceramic pads) |
| Rotor type | Slotted and cross drilled |
| Rotor casting | G3000 grade, 210 Brinell hardness, 250 MPa tensile strength |
| Rotor plating | Zinc-dichromate |
| Brake pads | Ceramic, posi-mold |
| Rotor height | 3 inch tall, full cast |
| Brake position | Front |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
No vehicle is named for K2152. Look at the specifications at Power Stop for this part number, and measure your existing rotor height against the 3 inch figure.
Without a stated vehicle, no exclusions can be given. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake lines are not part of K2152, and the kit is direct fit. The 3 inch rotor height is a quick way to check you are ordering the right size.
What’s included
The kit contains front drilled and slotted full cast rotors and Evolution Series ceramic brake pads.
Not included: Brake lines, calipers, and any other parts your vehicle needs.









