Select your vehicle

Power Stop 1-Click Drilled And Slotted Brake Kit – K5805

Power Stop

Out of stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 3:30 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front and rear 1-Click kit
  • Cross-drilled and slotted rotors with silver zinc plating
  • Z16 ceramic scorched pads
  • Fitment not listed

Description

Overview

The Power Stop K5805 is a front-and-rear 1-Click Drilled and Slotted brake kit made up of silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads.

Power Stop publishes no vehicle list for the K5805. The rotors come coated, the design is direct fit, and brake lines are not included.

Key features

  • Silver zinc plated cross-drilled and slotted rotors
  • Z16 ceramic scorched brake pads
  • Rotors and pads supplied together as a 1-Click kit
  • Rotors are coated
  • Direct fit
  • Brake lines not included

Before you buy

Cross-drilled and slotted rotors are built to manage heat and moisture at the pad contact surface. The holes and slots let gases, water and worn pad material escape, which helps the pads keep consistent contact during repeated stops. The same features create edges that wear over time, so the rotors should be inspected at each pad change.

New pads need a short bedding-in routine before they reach full performance. Make several moderate stops from a steady speed, then allow the brakes to cool. This lays an even layer of pad material on the rotors and reduces noise and vibration later.

Before fitting, inspect the calipers, slide pins and hub faces. Clean rust from the mounting surface so the rotor sits flat, and check the brake lines for cracks, bulges or leaks since they are not part of this kit.

  • Scoring, cracks or a pulsing pedal suggest the rotors are worn
  • Replace both sides of an axle together
  • Keep rotors and pads on the same axle as a matched set

Specifications

Brand Power Stop
Part number K5805
UPC 70000702459
Brake position Front and rear
Rotor type Cross-drilled and slotted
Rotor finish Silver zinc plated
Brake pads Z16 ceramic scorched
Rotor coating Coated
Brake lines Not included
Fit type Direct fit

Vehicle fitment

This kit covers both axles, so the front and rear positions each need matching to your vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.

Check your vehicle’s year, model and trim against the front and rear positions before ordering.

Installation notes

It is a direct-fit kit that does not include brake lines. Replace the rotors and pads on both wheels of the axle together so braking stays balanced.

What’s included

Silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads.

Not included: brake lines.

SKU: PSTK5805 Category:

Specification

Shipping weight 71.73 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Questions & Answers

What vehicles is the K5805 for?

Fit depends on your vehicle's year, model and trim, so confirm those before ordering. The kit covers both axles, so each position needs its own match.

What pads does this 1-Click kit use?

The kit pairs silver zinc plated, cross-drilled and slotted rotors with Z16 ceramic scorched brake pads. Both arrive together as a matched 1-Click set for the front and rear axles.

Are the rotors coated?

Yes. The rotors come with a coating, and they are silver zinc plated, cross-drilled and slotted. Brake lines are not included with the kit.

How can I tell when the rotors need replacing?

Replace them when they show deep scoring, cracks, a raised lip at the outer edge or uneven thickness. A pulsing pedal, vibration under braking or grinding noise after the pads wear through are also signs. Measure thickness against the minimum stamped on the rotor and replace any rotor below it.

Should the brake lines be inspected during installation?

Yes, even though they are not part of the kit. Look for cracks, bulging, leaks and corrosion at the fittings. Replace any damaged line before the job is finished, because a failing line can compromise the whole braking system.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon