Overview
The Power Slot 127.65083L is a front left StopTech Sport Rotor that is drilled and slotted, with a 12.01 in. diameter and 4.29 in. height. It is a factory replacement disc designed to work with factory calipers.
Cross drilling and slots wipe pad debris away and add bite. The finish helps pads avoid glazing and supports better braking in wet and dry conditions.
Key features
- Slotted and cross drilled face
- Clears debris between pad and disc
- Finish that helps prevent pad glazing
- Front left position
- 12.01 in. diameter and 4.29 in. height
Choosing a replacement disc
A replacement rotor has to match the factory disc in more than one way. Diameter affects how the disc sits against the pad and how much clearance remains around the wheel, while height controls the position of the caliper relative to the friction surface. Mismatched dimensions can cause vibration or rubbing even when the bolt pattern lines up.
Front discs handle most of the braking load on many vehicles, which makes their condition worth checking whenever pads are replaced. Look for deep scoring, heat spots or a raised lip at the outer edge. Keep the hub face clean and free of rust, and replace the disc once it reaches its minimum thickness.
- Measure the factory disc before ordering
- Clean the hub and pilot before mounting
- Use the wheel fastener torque from your owner guide
Specifications
| Brand | Power Slot |
|---|---|
| Part number | 127.65083L |
| UPC | 70000551776 |
| Position | Front left |
| Rotor line | StopTech Sport Rotors |
| Diameter | 12.01 in. |
| Height | 4.29 in. |
| Face | Slotted and cross drilled |
Vehicle fitment
Confirm the 12.01 in. diameter and 4.29 in. height against your vehicle’s factory specifications before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 4.29 in. height against the factory disc before mounting, and make sure the caliper clears the new rotor.
What’s included
The rotor is for the front left position. Quantity and hardware are not included.
Not included: Pads and mounting hardware are not included with the rotor.









