Overview
The Power Slot 127.65060L is a front left StopTech Sport Rotor with a drilled and slotted face, measuring 12.13 in. in diameter and 4.06 in. in height. It is a direct replacement for factory brake systems that use factory calipers.
The slotted and cross drilled face is said to clear debris between pad and disc, add bite, and help rear brakes match the look of a front big brake kit. The finish is meant to resist pad glazing and improve braking in wet and dry conditions.
Key features
- Direct replacement for factory brake systems with factory calipers
- Slotted and cross drilled face clears debris between pad and disc
- Finish meant to help prevent pad glazing
- Front left position
- 12.13 in. diameter and 4.06 in. height
Choosing a replacement rotor
Brake rotors wear down over time as the pads grind against the friction surface, and they can develop thickness loss, scoring or heat cracks. When a rotor is worn past its minimum thickness, braking can feel less consistent and the pedal may pulse. Measuring the disc with a micrometer and comparing it to the minimum thickness cast into the hat is a useful check before replacing parts.
A drilled and slotted face is meant to help gas and debris leave the pad surface, which some drivers prefer for spirited road use. Slots and holes also create more edges that can wear pads faster, so pad choice matters. Pair a new rotor with pads rated for the same use, and bed them in with a controlled series of stops.
Rotors and pads are often replaced together, along with any hardware that shows wear. Inspect the caliper slides and check the wheel bearing for play while the wheel is off. Keep the hub face and wheel mounting surface clean and free of rust so the new disc seats flat.
- Check rotor thickness and runout before fitting
- Replace pads at the same time as the rotors
- Clean the hub face and wheel mounting surface
- Inspect caliper slide pins for smooth movement
Specifications
| Brand | Power Slot |
|---|---|
| Part number | 127.65060L |
| UPC | 70000551764 |
| Position | Front left |
| Rotor line | StopTech Sport Rotors |
| Diameter | 12.13 in. |
| Height | 4.06 in. |
| Face | Slotted and cross drilled |
Vehicle fitment
Compare the 12.13 in. diameter and 4.06 in. height with the factory rotor, then confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 4.06 in. height with the factory rotor before fitting, since the factory caliper must clear the new disc.
What’s included
The rotor is for the front left position. Check the package contents against your installation before starting.
Not included: No pads or hardware are described with this rotor.












