Select your vehicle

Power Slot StopTech Sport Rotors – 127.65060R

Power Slot

Shop Power Slot Disc Brake Rotors on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front right StopTech Sport Rotor, part number 127.65060R from Power Slot
  • Drilled and slotted face, 12.13 in. diameter, 4.06 in. height
  • Direct replacement for factory brake systems
  • Finish intended to resist pad glazing
  • No vehicle makes or years listed

Description

Overview

The Power Slot 127.65060R is the front right StopTech Sport Rotor, a drilled and slotted disc measuring 12.13 in. in diameter and 4.06 in. in height. It replaces factory discs on factory calipers.

The face is designed to improve cooling. Cross drilling and slots help clear debris, and the finish is designed to prevent pad glazing and support wet and dry braking.

Key features

  • Front right position
  • Drilled and slotted face
  • Designed to improve cooling.
  • Finish intended to prevent pad glazing
  • 12.13 in. diameter and 4.06 in. height

Cooling and pad care

Cooling on a brake system depends on the rotor face, the pads and how the brakes are used. A cross drilled and slotted face gives heat and gas somewhere to go, but it does not replace good pad selection. Check the pad compound and thickness at the same time as the rotor.

Hot brakes can glaze pads, so let the system cool after long descents or repeated hard stops. Clean debris from the slots and hub, and check the rotor face at each pad change for cracks or hot spots. Replace the rotor when the surface is deeply grooved or worn below its minimum thickness.

  • Let brakes cool after long descents
  • Check rotor face for hot spots
  • Match pads to the rotor

Specifications

Brand Power Slot
Part number 127.65060R
UPC 70000551765
Position Front right
Rotor line StopTech Sport Rotors
Diameter 12.13 in.
Height 4.06 in.
Face Slotted and cross drilled

Vehicle fitment

No vehicle makes, models or years are listed. Confirm the diameter, height and front right position against your vehicle’s factory data.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check the 4.06 in. height and the front right side before mounting, because the stock caliper has to clear the disc.

What’s included

It is a front right rotor.

Not included: Pads and hardware are not included.

SKU: PSL127.65060R Category:

Specification

Shipping weight 28.00 lbs
Package dimensions 14.00 × 14.00 × 6.00 in
brands

Questions & Answers

Is the 127.65060R the front right version?

Yes. It is a front right Power Slot StopTech Sport Rotor, drilled and slotted, with a 12.13 in. diameter, 4.06 in. height and UPC 70000551765.

Does this rotor improve cooling?

Yes. The slotted and cross drilled face is designed to improve cooling and clear debris. No test results are available, so compare the rotor's dimensions with your current rotor before fitting.

Which vehicles fit the 127.65060R?

No vehicle makes, models or years are listed. Use the factory data for your vehicle to confirm the diameter, height and front right position before ordering.

Can I resurface a drilled and slotted rotor?

Resurfacing is possible only when the rotor still has enough thickness above its minimum. Check the thickness first, and replace the rotor if it is at or near the limit or if the holes and slots show cracks.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Power Slot Disc Brake Rotors on Amazon