Overview
The Power Slot 126.44129CSR is a front right cryogenic replacement brake rotor with a 6-lug pattern, a 12.56 in. diameter and a 2.66 in. height. It is coated and slotted, and it goes through deep cryogenic treatment.
Cryogenic treatment is a one-time process meant to improve the performance and service life of metal parts. This rotor is cooled gradually to -300°F by a computer-controlled method, returned slowly to room temperature and heat-cycled as the final step. That process redistributes residual stress in the rotor, adding protection against warping.
Key features
- Deep cryogenic treatment cooled gradually to -300°F, then heat-cycled
- Residual stress redistributed to add protection against warping
- Coated finish
- Slotted face
- Front right position with a 6-lug pattern
Cryo treatment and rotor replacement
Cryogenic treatment is a process used on brake rotors to change the metal structure, and the result depends on the alloy and the treatment schedule. A treated rotor still needs regular inspection. Check the face for heat checking, hard spots or a lip at the edge, and replace the rotor when it is worn below its minimum thickness.
Because the height and hub pattern decide how the rotor sits, replacement rotors should be matched carefully. Install new pads at the same time, and clean the hub face and rotor hat before mounting. Replacing front rotors in pairs keeps braking even from side to side.
- Check the hub face for rust before mounting
- Match pad compound to a slotted rotor
- Measure minimum thickness at every service
Specifications
| Brand | Power Slot |
|---|---|
| Part number | 126.44129CSR |
| UPC | 822903459330 |
| Position | Front right |
| Rotor type | Cryo replacement rotor |
| Diameter | 12.56 in. |
| Height | 2.66 in. |
| Lug count | 6 |
| Surface | Coated |
| Face | Slotted |
| Treatment | Deep cryogenic, cooled to -300°F |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the 12.56 in. diameter, 2.66 in. height and 6-lug pattern with your vehicle’s factory rotor.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a front right part, so confirm the side before fitting. Compare the 2.66 in. height and 6-lug pattern against the factory rotor, since those dimensions determine how the rotor sits on the hub.
What’s included
It is a front right replacement part.
Not included: Brake pads and mounting hardware are not included.












