Overview
The Poison Spyder Customs Stock Crusher Corners (Bare Steel), part number 11-04-010, are full rear corner armor in 3/16″ plate steel for the 1976–1986 Jeep CJ7.
Poison Spyder Customs makes the Stock Crusher Corners with the factory wheel opening and fuel filler opening, plus mounting holes for the factory equipment, including the factory flares, tail light and license plate frame. The corners are laser cut from high strength steel plate and roll-formed to the body lines of the Jeep. All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws leave a smooth, flat surface that slides over rocks. The CJ7 is an older body with its own contours, which is why Poison Spyder forms these corners to the CJ7 body lines instead of using a universal blank.
Key features
- Full corner armor for the CJ7 rear body
- Laser cut from high strength 3/16″ plate steel
- Roll-formed to follow the body lines
- Factory wheel opening and fuel filler opening
- Mounting holes for factory flares, tail light and license plate frame
- Countersunk bolt holes
- Stainless steel flat head cap screws included
- Square cut-outs
Rust prevention for bare steel
Full crusher corners protect the rear body corners from rocks, stumps and trail debris. Bare steel takes that abuse well, but it rusts when exposed to water, road salt and mud. A clean, dry surface helps any coating bond properly, so degrease and dry the metal before priming or painting after installation.
Because cutting is needed to fit these corners, plan the work before starting and deburr the cut edges so they do not chip paint or harm the hands. Keep the countersunk bolt holes free of paint buildup so the flat head screws seat flush. Inspect the welds, fasteners and surface periodically, touching up scratches promptly. Check the body around the corners for rub points as the vehicle flexes on rough terrain.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 11-04-010 |
| UPC | 614901723175 |
| Product type | Stock crusher corners (full rear corner armor) |
| Material | Steel plate, 3/16″ thick |
| Finish | Bare steel |
| Corner type | Full |
| Cut-outs | Square |
| Hardware | Stainless steel flat head cap screws |
| Fitment type | Direct fit |
| Installation type | Cutting or drilling required |
Vehicle fitment
Poison Spyder Customs lists part number 11-04-010 for the Jeep CJ7 from 1976 to 1986. The Stock Crusher Corners keep the factory-style wheel opening, so they suit a CJ7 that retains its stock wheel arches.
The CJ5, YJ, TJ and later Wranglers have their own corner designs and are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cutting or drilling is needed to fit these corners to the body. The countersunk bolt holes work with the stainless flat head cap screws that come with the kit, which keeps the surface flat for sliding over rocks.
What’s included
A pair of full crusher corners with stainless steel flat head cap screws.












