Overview
The Rigid Industries 50 Inch Upper Windshield Mount, part number 40137, is a brow mount kit for the Jeep Wrangler TJ (1997-2006). It holds a 50 inch E-Series or SR-Series LED light bar over the windshield and uses the TJ’s existing A-pillar mounting points with no drilling or cutting.
The brackets are 3/16 inch stainless steel with a Satin Black powder coat to match the light bar. Rubber gaskets are included to keep the brackets from damaging the paint.
Key features
- Brackets use the TJ’s existing A-pillar mounting points
- No drilling or cutting is required.
- 3/16 inch stainless steel construction
- Satin Black powder coat finish
- Rubber gaskets to protect the paint
Before you mount a light bar
A windshield light bar adds weight and wind load to the upper body of the vehicle, so the mount should be checked after the first trips. Look at how the brackets sit against the pillar, make sure the gaskets are seated, and confirm the bar is square and level. Any movement at the brackets under load should be addressed before further use, since a loose bar can shift in rough terrain.
Wiring is part of the job. A fused relay protects the vehicle’s electrical system and keeps the light’s power draw off the stock circuits. Route the harness away from moving parts and sharp edges. Local rules on auxiliary lights and roadway use vary, so check them before installing the bar where it will be driven on public roads.
- Check bracket seating and gasket condition after first trips
- Use a fused relay for the light bar
- Route wiring clear of moving parts and edges
- Re-check fasteners after rough terrain use
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 40137 |
| UPC | 815711010619 |
| Color | Black (Satin Black powder coat) |
| Material | 3/16 inch stainless steel |
| Light bar compatibility | 50 inch E-Series or SR-Series LED |
| Mounting location | Upper windshield, A-pillar points |
| Gaskets | Rubber, included |
| Drilling | None required |
Vehicle fitment
It is designed for the Jeep Wrangler TJ, 1997-2006. It uses the TJ’s A-pillar mounting points.
It is not made for the LJ, JK or later Wranglers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets attach at the existing A-pillar points, so no drilling or cutting is needed. Wire the light bar through a fused relay, and check local rules before using it on public roads.
What’s included
The kit includes the brackets and the rubber gaskets. Not included: the 50 inch E-Series or SR-Series LED light bar.









