Overview
This G2 Axle and Gear pipe plug, part number 67-451B, is a differential drain plug made for a Core 44.
Check the thread size, material and finish against your axle housing before installing.
Key features
- Pipe plug
- Differential drain plug category
- Made for a Core 44 differential
Draining and sealing a differential
A differential drain plug is a small part, but it controls whether fluid stays in the housing. Plugs are removed for fluid changes and inspected for stripped threads or damaged sealing surfaces. Because the plug is a seal, a good fit and clean threads matter as much as the plug itself.
Before fitting a plug, clean the threads and check the housing opening for damage. Thread sealant or a new sealing washer may be needed depending on the design, and the fluid level should be checked after the job. Leaks around a drain plug often show up after the first drive, so look for wetness once the vehicle has been used.
- Clean the threads before fitting
- Replace a damaged sealing washer
- Check the fluid level after installation
- Look for leaks after the first drive
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 67-451B |
| UPC | 631410123166 |
| Product type | Pipe plug (differential drain plug) |
| Made for | Core 44 |
Vehicle fitment
This plug is made for a Core 44 differential. Confirm your vehicle’s year, model and trim before ordering.
Confirm the axle housing this plug suits before ordering, and match it to your year, model and trim.
Installation notes
Follow the installation steps for your axle and tighten the plug to its specified torque.
Use the correct differential fluid and check for leaks after the first miles of driving.
What’s included
One pipe plug.
Not included: differential fluid or sealant.








