Overview
The Trail Gear 140032-1-KIT is a magnetic drain plug for differential housings, transfer cases and transmissions. It has a low profile design with a recessed 10mm Allen socket.
Magnetic drain plugs keep metal particles from building up in the oil. Washer material is your choice, aluminum or steel, matched to the case type.
Key features
- Magnet catches metal to keep it from building up in the oil
- Low profile design with recessed 10mm Allen socket
- Choice of aluminum or steel washers
- Aluminum washers for transfer cases and aluminum transmissions (G, W and R series)
- Steel washers for axle housings and steel transmissions (L series)
Choosing the washer and fitting it
A magnetic drain plug works as a simple filter for the gearcase. The magnet pulls iron particles out of the oil as they wear off gears, bearings and synchros, so they settle on the plug instead of circulating. A clean magnet at each fluid change tells you a lot. Light fuzz is normal, while larger chunks or a heavy layer usually mean something inside is wearing and deserves a closer look before the vehicle returns to hard use.
The washer decides how the plug seals and how it handles heat. Aluminum washers suit transfer cases and aluminum transmissions, while steel washers suit axle housings and steel transmissions. Mixing them up can cause a weak seal or a leak, so match the washer to the case type before the plug is threaded in.
- Clean the magnet each time you drain the fluid
- Replace a washer that is cracked, flattened or pitted
- Use fresh gear oil after the plug is reinstalled
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140032-1-KIT |
| UPC | 70000621758 |
| Socket | 10mm recessed Allen |
| Washer options | Aluminum or steel |
| Fitment | Universal fit listed |
Vehicle fitment
No vehicle is named. Trail Gear lists universal fit, and the right washer depends on the case type rather than a vehicle.
Match the washer material to your transfer case, transmission or axle housing before installing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pick the washer material before the plug goes in, because the choice follows the case type. The recessed 10mm Allen socket means a matching Allen bit is needed to turn the plug.
What’s included
Count the plugs and washers in the package before you start, since the kit contents vary by setup.








