Overview
The Trail Gear 140033-1-KIT is a magnetic drain plug for transfer cases, transmissions and axle housings. Its magnet is meant to catch metal particles so they do not build up in the oil. The plug uses a low profile design with a recessed 10mm Allen socket, and you choose an aluminum or steel washer to suit the unit it goes into.
Aluminum washers are designed for transfer cases and aluminum transmissions in the G, W and R series. The steel washer is designed for axle housings and steel transmissions in the L series, so the washer material is the main choice to make.
Key features
- Magnet collects metal particles that would otherwise build up in the oil
- Low profile design
- Recessed 10mm Allen socket
- Choice of aluminum or steel washer
- Aluminum washer for transfer cases and G, W and R series aluminum transmissions
- Steel washer for axle housings and L series steel transmissions
Before you drain and refill
Drain plugs of this type are usually changed when the fluid is, so plan the job around fresh oil and clean threads. Warm the gear oil slightly so it drains fully, but let it cool enough to handle safely. Position a catch pan under the plug and open the fill plug first, so the fluid comes out freely once the drain is loosened.
The washer is the only part that needs a choice, and it should be replaced when it shows damage. A new washer seats better and helps prevent leaks around the plug. Before you buy, check the case type on the unit you are working on, because the washer material follows that case rather than the vehicle model.
- Keep a clean rag nearby for spills
- Check the thread condition before reinstalling
- Tighten the plug to the unit’s own specification
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140033-1-KIT |
| UPC | 70000621761 |
| Drive | Recessed 10mm Allen socket |
| Design | Low profile magnetic drain plug |
| Washer material | Aluminum or steel (choose one) |
| Washer use | Aluminum: transfer cases and aluminum G, W and R series transmissions. Steel: axle housings and steel L series transmissions |
Vehicle fitment
It fits transfer cases, transmissions and axle housings, and the washer material decides which unit it suits.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choose the washer that matches the case or housing before threading the plug in. The recessed 10mm Allen socket is turned with an Allen key, so have the right size on hand. Wear eye protection when draining hot gear oil.
What’s included
The kit offers a choice between an aluminum or steel washer, with the rest of the contents to confirm on arrival.
Not included: Gear oil is not part of this item.








