Overview
The Fabtech FTS8057 is a front performance steering stabilizer for 2011–2018 Chevrolet Silverado 2500 HD and 3500 HD trucks and GMC Sierra 2500 HD and 3500 HD trucks. It is a single shock that damps steering input, and Fabtech describes its dampening capabilities as excellent.
The stabilizer is designed to work with Fabtech lift kits. It is made for heavy-duty trucks rather than 1500 pickups, and it uses a polyurethane bushing and a closed cell foam insert.
Key features
- Designed to work with Fabtech lift kits
- Excellent dampening capabilities
- High flow 9 stage valving
- Twin tube hydraulic construction
- 9/16 in. hardened chrome piston rod
- 1 3/8 in. OD piston
- Closed cell foam insert
- Polyurethane bushing
Heavy-duty steering stabilizer basics
Heavy-duty trucks create larger steering forces than light pickups, especially when they carry heavy loads or run larger tires. A front stabilizer absorbs sudden side-to-side movement so the steering stays steady. On a lifted truck, the geometry changes, which adds stress to the linkage and makes proper alignment more important.
Valving affects how firmly the stabilizer responds to input. A stiffer setup resists movement more, while a softer one allows more motion before it acts. Choose based on how the truck is used, and remember that suspension and tire changes affect the feel as much as the stabilizer does. Inspect the piston rod for scoring and the seals for leaks during routine service.
- Match the stabilizer to the lift height in use
- Check the piston rod for scoring
- Look for leaks at the seals
- Replace worn bushings along with the unit
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS8057 |
| UPC | 674866104709 |
| Position | Front |
| Type | Single shock, twin tube hydraulic |
| Valving | 9 stage, high flow |
| Piston rod | 9/16 in. hardened chrome |
| Piston outside diameter | 1 3/8 in. OD |
| Insert | Closed cell foam |
| Bushing | Polyurethane |
| Fitment type | Direct fit |
Vehicle fitment
It fits these heavy-duty trucks, with trims in parentheses:
- 2011–2018 Chevrolet Silverado 2500 HD (High Country, LT, LTZ, WT)
- 2011–2018 Chevrolet Silverado 3500 HD (High Country, LT, LTZ, WT)
- 2011–2018 GMC Sierra 2500 HD (Base, Denali, SLE, SLT, WT)
- 2011–2018 GMC Sierra 3500 HD (Base, Denali, SLE, SLT, WT)
Not on the list: Silverado 1500 and Sierra 1500 models, and heavy-duty trucks from model years outside 2011–2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lift kits change steering geometry, so have the front end aligned after installing the FTS8057 on a lifted truck. Follow your truck’s service manual for torque values.
What’s included
Check the package contents against your installation before starting.








