Overview
The Fabtech FTS7001 is a single performance steering stabilizer for the 2000–2004 Ford Excursion, the 1999–2004 Ford F-250 and F-350 Super Duty, the 2014–2018 Ram 2500 and the 2013–2018 Ram 3500. It is set up for the front position and uses a 2 in twin tube hydraulic shock body.
The stabilizer uses the same construction as the Performance Shock line and is aimed at reducing bump steer and wheel shimmy on oversized aftermarket wheels and tires. It has a white powdercoat finish with a blue Fabtech logo. It is a stabilizer-only unit, so brackets and a shock boot are not included.
Key features
- Single stabilizer, stabilizer only
- Front position
- Twin tube hydraulic body, 2 in diameter
- EB1 upper and lower mounts
- No reservoir
Choosing a stabilizer for heavy trucks
Heavy duty Ford and Ram trucks place more load on the steering linkage than lighter vehicles, so the stabilizer works against stronger forces. A single front stabilizer with a twin tube body helps keep the wheels from wandering over ruts and bumps, but its effect depends on the rest of the front end. Mount hardware, bushings and the tie rod ends all contribute to how the truck feels.
When choosing a unit, match the mounting style and travel to the original stabilizer and to the wheels and tires in use. Larger tires can change the angle the stabilizer works through, so measure before ordering and check clearance at full lock.
- Compare mount style with the original unit
- Check clearance at full steering lock
- Inspect the tie rod ends during the same job
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7001 |
| UPC | 674866006973 |
| Configuration | Single |
| Position | Front |
| Type | Stabilizer only |
| Collapsed length | 23.95 in |
| Extended length | 14.42 in |
| Travel | 9.53 in |
| Lower mount | EB1 |
| Upper mount | EB1 |
| Reservoir | No |
| Shock body | 2 in diameter, twin tube hydraulic |
| Finish | White powdercoat with blue Fabtech logo |
| Fitment type | Direct fit |
| Brackets | Not included |
| Shock boot | Not included |
Vehicle fitment
The manufacturer fitment list covers the 2000–2004 Ford Excursion (Eddie Bauer, Limited, XLS and XLT), the 1999–2004 Ford F-250 and F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL and XLT), the 2014–2018 Ram 2500 and the 2013–2018 Ram 3500, with several Big Horn, Laramie, Limited, SLT and Tradesman trims.
The 2005–2007 Super Duty trucks and the 2013 Ram 2500 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are not included, so confirm the bracket hardware your truck needs before removing the original stabilizer. The EB1 upper and lower mounts should be checked against your current mounting points.
What’s included
One stabilizer, sold as a stabilizer-only unit.
Not included: Brackets and shock boot.











