Overview
The Fabtech FTS8001 is a dual steering stabilizer complete kit for the 1999–2004 Ford F-250 Super Duty, the 1999–2004 Ford F-350 Super Duty and the 2000–2005 Ford Excursion. A steering stabilizer is a hydraulic damper that resists sudden side-to-side movement of the front wheels, which helps when the steering gets knocked around on rough ground.
The shock body uses the same construction as Fabtech Performance Shocks. Its design aims to reduce bump steer and wheel shimmy, the vibrations that can appear when oversized aftermarket wheels and tires are fitted. The kit includes heavy duty brackets that are designed for straightforward mounting.
Key features
- Dual configuration with two stabilizers in one complete kit
- Shock body built with the same construction as Fabtech Performance Shocks
- Heavy duty brackets included for mounting
- Intended to cut bump steer and wheel shimmy on oversized aftermarket wheels and tires
- Direct fit type, per the manufacturer
Dual stabilizers on heavy duty trucks
A dual stabilizer setup places two dampers across the front axle, sharing the load of controlling side-to-side movement at the wheels. Heavy duty trucks with larger tires and wheels generate more steering force, so a dual arrangement can help keep the front end settled when the steering is pushed on rough ground. Both units should be matched and mounted with the same geometry so the axle moves evenly.
Before installation, check the brackets, the mounting points on the axle and the steering linkage for wear. Two new stabilizers will not correct worn ball joints or bent tie rods, so those parts should be inspected at the same time.
- Check both sides for matching mounting height
- Confirm bracket bolts are tightened to the vehicle’s specification
- Re-check the stabilizers after the first drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS8001 |
| UPC | 674866007482 |
| Configuration | Dual |
| Kit type | Complete kit |
| Extended length | 23.95 in |
| Compressed length | 14.42 in |
| Travel | 9.53 in |
| Top mounting | Loop |
| Lower mounting | Loop |
| Body diameter | 2 in |
| Finish | White |
| Brackets | Included |
| Shock boot | Not included |
Vehicle fitment
The manufacturer fitment list covers the 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS and XLT trims) and the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty (King Ranch, Lariat, XL and XLT trims). The list shows no Ford F-150 and no Super Duty model from 2005 onward.
Models outside those year ranges are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes the brackets, so compare them with your existing mounting points before removing the original stabilizer.
What’s included
The kit contains the dual stabilizers and the brackets.
Not included: Shock boot.











