Overview
The Fabtech FTS7006 is a dual performance steering stabilizer for the 2005–2007 Ford F-250 Super Duty and F-350 Super Duty. It uses a 2 in twin tube hydraulic shock body with an S1 lower mount and an EB1 upper mount.
The construction is shared with Fabtech’s performance shocks, and the stabilizer is designed to reduce bump steer and wheel shimmy. It is a stabilizer-only unit, so brackets and a shock boot are not part of the package.
Key features
- Dual configuration
- 2 in twin tube hydraulic shock body
- Lower S1 and upper EB1 mounts
- Intended to reduce bump steer and wheel shimmy
- Stabilizer-only type with no reservoir
Preparing for dual stabilizer installation
Dual stabilizers have a different layout from single units, so the first step is confirming which setup your truck uses before any parts come off. Mount style at each end matters, and the bracket hardware has to suit both ends of the unit. Taking a clear photo of the original hardware helps with reassembly and makes it easier to spot a mismatch early.
Once the unit is in place, check that it moves freely through its full travel without binding against the frame or linkage. Re-check bolts after the first few drives, since new mounts can settle. Keep the steering parts that control the stabilizer in good shape, because worn tie rod ends or loose joints put extra load on any damper.
- Photograph the original hardware before removal
- Check both ends for matching mount style
- Re-torque fasteners after the first drives
- Inspect tie rod ends when replacing a stabilizer
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7006 |
| UPC | 674866014527 |
| Configuration | Dual |
| Type | Stabilizer only |
| Fitment type | Direct fit |
| Collapsed length | 27.07 in |
| Extended length | 15.76 in |
| Travel | 11.31 in |
| Lower mount | S1 |
| Upper mount | EB1 |
| Reservoir | No |
| Shock body | 2 in diameter, twin tube hydraulic |
| Finish | White powdercoat with blue Fabtech logo |
| Brackets | Not included |
| Shock boot | Not included |
Vehicle fitment
The manufacturer fitment list covers the 2005–2007 Ford F-250 Super Duty and F-350 Super Duty, in Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims. No Excursion, F-150 or other Ford models are on the list.
The 1999–2004 Super Duty years are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are not included, so confirm the bracket hardware your truck needs before removing the original unit. The S1 lower and EB1 upper mounts differ, so check each end separately.
What’s included
One dual stabilizer, supplied as stabilizer only.
Not included: Brackets and shock boot.









