Overview
The MSD Billet Distributor 8547 is a billet aluminum magneto distributor set up for engines that run locked-out timing or an MSD Timing Computer. MSD lists its advance type as mechanical and its distributor type as magneto.
MSD built it mainly for race engines. The rotor plate is welded directly to an oversized shaft, and there is no advance assembly. It uses a high-output magnetic pick-up.
Key features
- Billet aluminum body
- No advance assembly; rotor plate welded to the oversized shaft
- Sealed ball bearing guides the top of the shaft
- Extra long sintered bushing stabilizes the lower shaft
- High-output magnetic pick-up, which MSD says is extremely accurate and never requires adjustment
- Oversized +.006 bronze gear with an adjustable slip collar
Choosing a timing setup
A distributor routes spark to the right cylinder at the right moment, and on a race engine the timing plan matters as much as the hardware. Without a mechanical advance assembly, the spark curve has to come from the engine builder’s setup, either a locked-out timing value or a timing computer that controls spark. Plan the ignition system before the distributor arrives so you know whether you are running a fixed curve or a computer-managed one.
Because the rotor plate sits directly on the shaft with no separate advance parts, there are fewer moving pieces to wear, but the shaft bushings and bearings still carry load. Check for side play in the shaft and inspect the cam gear mesh after installation. Keep the cap, rotor and wires in good condition, since the distributor can only deliver what the coil and plugs allow.
- Check cam gear backlash before final timing
- Confirm the timing controller is set before the first start
- Inspect the cap and rotor for carbon tracking
- Re-check the hold-down clamp after the first heat cycle
Specifications
| Brand | MSD |
|---|---|
| Part number | MSD8547 |
| Advance type | Mechanical |
| Distributor type | Magneto |
| Body | Billet aluminum |
| Gear | Oversized (+.006) bronze |
| Bearings | Sealed ball bearing at top; extra long sintered bushing at bottom |
| Trigger | High-output magnetic pick-up |
| Fitment label | Universal Fit |
Vehicle fitment
Confirm the engine and timing setup for your application before ordering, since this distributor is built for locked-out timing or an MSD Timing Computer. It carries a Universal Fit label.
Installation notes
Because the distributor has no advance assembly, plan on locked-out timing or an MSD Timing Computer. The adjustable slip collar accommodates modified blocks, heads or intake manifolds. Race distributors like this should be installed and timed by someone experienced with ignition setup.
What’s included
The distributor with the oversized bronze gear and adjustable slip collar, part MSD8547.









