Overview
The Omix-Ada 17239.05 is a complete replacement distributor for the 4.0L 6 cylinder engine. It is a magneto unit with mechanical advance and fits as a direct replacement.
The unit comes with a cap, rotor, distributor drive gear and a female three-prong plug end. Omix-Ada says you can drop it in, plug it in and start it up, but no vehicle year, make or model is named.
Key features
- Complete unit with cap and rotor
- Distributor drive gear included
- Female three-prong plug end
- Magneto type with mechanical advance
Before you swap a distributor
The distributor sends spark from the coil to each spark plug in firing order, so its parts wear as a set. The cap and rotor carry high voltage on every firing, and carbon tracks, cracks or erosion on the rotor tip can cause misfires that look like plug or wire trouble. The drive gear meshes with the engine’s drive system, so its teeth and the shaft should be inspected for wear at the same time.
A new unit sets its own position in the engine, so mark the original rotor position and cap alignment before removing the old distributor. Crank the engine as needed to re-engage the gear and confirm the rotor points where it should. Re-check timing once the engine runs and set it correctly before a long drive.
- Inspect the cap for cracks and carbon tracks
- Check the rotor tip for erosion
- Mark the original rotor position before removal
- Look for play in the distributor shaft
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17239.05 |
| UPC | 804314059316 |
| Engine | 4.0L 6 cylinder |
| Distributor type | Magneto |
| Advance type | Mechanical |
| Plug end | Female three-prong |
| Fitment | Direct Fit |
Vehicle fitment
It is a direct fit for the 4.0L 6 cylinder engine. Confirm fit for your vehicle’s year, model and trim before ordering, then check the drive gear and shaft against the original distributor before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The unit includes its own drive gear, so compare it with your original gear before dropping the new distributor in. Confirm the three-prong plug matches your harness before connecting it.
What’s included
The unit includes a distributor cap, rotor, distributor drive gear and a female three-prong plug end. Check the package contents against your installation before starting, including any gaskets or hardware you need.














