Overview
The MSD Pro-Billet Distributor, part number 85561, is a magneto-type ignition distributor with a billet aluminum housing and an adjustable mechanical advance. MSD built it for high rpm stability, pairing a steel shaft with a sealed ball bearing and a long sintered bushing.
The housing is machined from a billet of 6061-T6 aluminum on a CNC machine to exact tolerances. It is a universal fit design, so confirm the application for your engine before installing it.
Key features
- Housing machined from billet 6061-T6 aluminum on a CNC machine to exact tolerances
- .500 steel shaft supported by a sealed ball bearing and a long sintered bushing
- Shaft coated with QPQ for friction reduction and resistance to corrosion
- Precision machined reluctor triggers a high output magnetic pick-up mounted in the housing
- Magnetic pick-up has no moving parts to wear or adjust and is maintenance free
- Adjustable mechanical advance assembly sits just above the pick-up
- Different springs and stop bushings let you tune an advance curve to match your application
Matching the distributor to your engine
Because this distributor is a universal fit design, the engine side of the job falls to the installer. Drive gear type, shaft length, rotation direction and oil pump drive engagement all need to match the engine before the unit goes in. A mismatched shaft height can leave the drive gear misaligned and cause early wear.
Confirm the rotation direction of the engine and the distributor drive before marking the rotor position. Set the deck height and gear mesh, then install the hold-down so the distributor sits fully seated. Check that the rotor lines up with the firing order on the cap before reconnecting the plug wires.
After installation, set timing with the advance springs and bushings chosen for the application, and verify with a timing light. A magneto pick-up needs no gap adjustment, but the shaft and advance still need checks for free movement and smooth operation.
- Drive gear type and rotation direction
- Shaft length and deck height
- Oil pump drive engagement
- Firing order and cap alignment
Specifications
| Brand | MSD |
|---|---|
| Part number | 85561 |
| UPC | 85132855612 |
| Distributor type | Magneto |
| Advance type | Mechanical |
| Housing material | 6061-T6 aluminum, billet |
| Shaft diameter | .500 steel |
| Shaft coating | QPQ |
| Bearing | Sealed ball bearing with long sintered bushing |
| Pick-up | Magnetic, high output |
| Fitment | Universal Fit |
Vehicle fitment
It is a universal fit design, but the advance and firing must suit the engine, so confirm the application for your engine before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mechanical advance is tuned by choosing among the supplied springs and stop bushings to match the application. The pick-up has no moving parts to wear or adjust, so there is no pick-up setting to make.
What’s included
The package includes different advance springs and stop bushings, supplied so you can tune an advance curve to match your application.
Not included: A distributor cap, rotor and ignition coil are not included.












