Overview
The MSD 8595 is a Ready-To-Run magneto distributor with vacuum and mechanical advance. It has a built-in ignition module, so no external ignition controls are needed.
Installation means fitting the distributor into the engine and connecting three wires. It is a universal fit distributor, so the engine drive and shaft must be matched.
Key features
- Ready-to-run design: install it and connect three wires
- Built-in ignition module, no external ignition controls required
- Vacuum and mechanical advance
- Magneto distributor type
Fitting and wiring basics
A magneto distributor generates its own ignition signal, so it does not rely on a separate ignition box to make a spark. Setting it up is mostly mechanical: the drive must engage the engine correctly, the rotation must be right, and the wires must reach the correct connections.
Vacuum advance responds to engine load, while mechanical advance responds to engine speed, so both should be checked for free movement before installation. A worn or stuck advance can make timing hard to hold. Keep the wiring clear of hot exhaust parts and moving linkage, and check that connectors are tight after the first runs.
Specifications
| Brand | MSD |
|---|---|
| Part number | 8595 |
| UPC | 85132085958 |
| Distributor type | Magneto |
| Advance type | Vacuum and mechanical |
| Connection | Three wires |
| Ignition module | Built into housing |
| Fitment | Universal Fit |
Vehicle fitment
Universal Fit is the only fitment stated. A distributor has to match the engine’s drive and shaft, so compare those with your engine before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
After the distributor is installed, connect the three wires and set the timing to your engine’s specification. Disconnect the battery before working on the wiring.
What’s included
The package is the distributor only.









