Overview
The MSD Distributor Belt, part number 8722, is a replacement belt for MSD distributor use. It is universal fit, so the length and width need to match your distributor before fitting.
Because no vehicle, engine or distributor model is named, check the belt against your existing distributor set-up before ordering a replacement.
Measuring a replacement belt
A distributor belt carries drive power from the engine to the distributor, so it needs the correct tension and alignment to keep the distributor turning steadily. When a belt slips or stretches, the spark timing can wander, which often shows up as rough idle or hesitation under load. Replacement belts are usually chosen by length and width, so those measurements matter more than the brand name.
Start by measuring the old belt or the pulleys it runs on. Note the belt’s length, its width and the distance between the shafts, then compare those numbers with the replacement. A universal fit belt is not tied to one vehicle, but it still has to suit your distributor arrangement and pulley layout.
Replace the belt when it shows cracks, glazing, fraying or stretch. Check the pulleys for wear at the same time, because a worn pulley can wear a new belt quickly. After installation, rotate the engine by hand and confirm the belt tracks in the center of each pulley before starting.
Specifications
| Brand | MSD |
|---|---|
| Part number | 8722 |
| UPC | 85132087228 |
| Type | Replacement belt |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is given, with no vehicle years, makes or models named for this belt.
Confirm your vehicle’s year, model and trim before ordering.









