Overview
The Omix-Ada 17104.13 is a natural aluminum water pump for the 4.2L 6 cylinder Jeep Wrangler YJ, covering 1987–1990 model years with a serpentine belt drive.
A water pump circulates coolant through the engine and radiator. This is an OE type replacement with a natural finish, and it fits the Wrangler YJ in Base, Islander, Laredo, S, Sahara and Sport trims.
Key features
- Aluminum body
- Natural finish
- Built for the 4.2L 6 cylinder engine
- Serpentine belt configuration
Signs of a failing water pump
The water pump moves coolant through the block, so a failing unit usually shows up as leaks, noise or overheating. Most pumps have a small weep hole on the housing that releases coolant when the seal starts to go. A dry crust of coolant around that hole is an early sign of seal wear, and a bearing that is worn will often whine or grind as the engine speeds up.
Because the pump is belt driven, belt condition and tension matter as much as the pump itself. A slipping belt reduces pump speed and can make the engine run warm, while an overtightened belt loads the bearing and wears it early. When the pump is out, check the thermostat and hoses as well, since they affect how the system behaves after the new pump is installed.
- Coolant drips from the weep hole below the pump
- Whining or grinding from the pump area
- Temperature gauge climbing under load
- Coolant residue around the pulley or belt
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17104.13 |
| Type | OE replacement water pump |
| Material | Aluminum |
| Finish | Natural |
| Engine | 4.2L 6 cylinder |
| Belt drive | With serpentine belt |
| Fitment type | Direct Fit |
Vehicle fitment
The manufacturer fitment list covers the 1987–1990 Jeep Wrangler (YJ), including Base, Islander, Laredo, S, Sahara and Sport trims.
The list does not include later Wrangler YJ years or the Wrangler TJ. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One water pump. No gasket or hardware is described.









