Overview
The Omix-Ada 17111.12 is a serpentine belt for the 2.5L 4 cylinder Jeep, built to original specifications. It is designed for a belt drive with no A/C and with power steering, positioned on the accessory drive.
It fits the 1996–2000 Jeep Cherokee (XJ), the 1997–2002 Jeep Wrangler (TJ) and the 1995 Jeep Wrangler (YJ), each in the trims shown in the fitment section.
Key features
- Serpentine belt for the accessory drive
- Made for a 2.5L 4 cylinder engine
- Designed for a setup without A/C
- Limited five year warranty from Omix-Ada
Belt wear and replacement
A serpentine belt drives the accessory components from one run, so a failure can stop the alternator, the power steering pump and the water pump at once. Replacing it on a set schedule is easier than dealing with a snapped belt on the trail, where a stranded vehicle may have no quick way back to pavement.
Belt tension and the condition of the pulleys matter as much as the belt itself. A worn tensioner or a pulley with rough bearings can wear a new belt quickly, so spin each pulley by hand and check for wobble or noise before fitting the new one. Many owners replace the tensioner at the same time when the old one shows wear.
- Cracks or missing chunks in the ribs
- Glazed or shiny surfaces that can slip under load
- Fraying edges or oil contamination
- Squeal on startup or under load
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17111.12 |
| Type | Serpentine belt |
| Position | Accessory Drive |
| Engine | 2.5L 4 cylinder |
| A/C | Without A/C |
| Power steering | With power steering |
| Fit type | Direct Fit |
Vehicle fitment
Fits the 1996–2000 Jeep Cherokee (XJ) in Classic, Country, Limited, SE and Sport trims, the 1997–2002 Jeep Wrangler (TJ) in SE, Sahara, Sport and X trims, and the 1995 Jeep Wrangler (YJ) in Rio Grande, SE and Sahara trims.
Later Wrangler generations and other engines are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the routing against your engine’s accessory layout before installing.
What’s included
The package contains the serpentine belt only.
Not included: Check whether your tensioner or pulleys need replacement before installing the belt.









