Overview
The Omix-Ada 17111.39 is a serpentine belt for the accessory drive of the 3.8L 6 cylinder Jeep Wrangler JK, intended for vehicles without air conditioning.
The belt fits the 2007–2011 Jeep Wrangler (JK) in 2-door and 4-door forms, including Unlimited models. Serpentine belts run several engine accessories from one belt, and this one drives the accessory position.
Key features
- Serpentine belt design
- Accessory drive position
- Built for the 3.8L 6 cylinder engine
- It is a direct fit for the accessory drive position.
Replacing an accessory drive belt
A serpentine belt carries power from the crankshaft to the accessories mounted on the front of the engine. On a Wrangler with this setup, the belt drives the components in the accessory position, so a failing belt can stop more than one system at once. Replacing it is a routine job that goes more smoothly when the old belt is compared with the new one before anything is removed.
Belts age from heat and use. Look for cracks across the ribs, glazed or shiny patches, fraying along the edges and missing pieces of rib. A belt that squeals under load or slips on startup often points to wear, but the tensioner and pulleys should be checked too, since a weak tensioner can wear a new belt quickly.
- Check belt tracking on each pulley after installation
- Inspect the tensioner spring and pivot for play
- Look for oil or coolant on the belt surface
- Recheck belt tension after the first few drives
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17111.39 |
| Type | Serpentine belt |
| Position | Accessory Drive |
| Engine | 3.8L 6 cylinder |
| Air conditioning | Without A/C |
| Fitment type | Direct Fit |
Vehicle fitment
The manufacturer fitment list covers the 2007–2011 Jeep Wrangler (JK), including 2-door and 4-door trims such as Rubicon, Sahara, Sport, X and 70th Anniversary.
The list does not cover the 2012–2018 Wrangler (JK) or the 2018–2022 Wrangler (JL). Confirm your vehicle’s year, model and trim before ordering.
What’s included
One serpentine belt. No tensioner or pulleys are described.









