Select your vehicle

Crown Automotive Serpentine Belt – 53010257

Crown Automotive

$50.28In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 9:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Serpentine belt, part number CRO53010257, 79.0 inch length with 6 ribs
  • For 2.5L 4-cylinder engine without A/C and with power steering
  • Accessory drive position
  • Fitment list spans Fiat 500X, Jeep Cherokee (XJ), Compass, Renegade, Wrangler (TJ) and Wrangler (YJ)

Description

Overview

The Crown Automotive serpentine belt, part number CRO53010257, is a 79.0 inch belt with 6 ribs for the accessory drive. It is for a 2.5L 4-cylinder engine without A/C and with power steering. It fits Fiat 500X, Jeep Cherokee (XJ), Compass, Renegade and Wrangler (TJ and YJ) models in several years and trims.

Key features

  • Length of 79.0 inch
  • 6 ribs
  • Accessory drive position
  • Matched to a 2.5L 4-cylinder engine without A/C and with power steering.

Belt routing and wear

A serpentine belt drives accessories such as the alternator, water pump and power steering pump from a single run. Wear usually shows as cracks across the ribs, a glazed or shiny surface, missing chunks or squeal on startup, and wet conditions off-road can make the belt slip and squeal until it dries.

Replace the tensioner and idler pulleys alongside the belt when they show play, noise or roughness, since a worn pulley can wear a new belt quickly. Check the routing against the under-hood diagram before fitting, because a 6-rib belt must seat correctly on every pulley.

  • Check the tensioner for movement
  • Inspect idler pulleys for noise or play
  • Look for glazing or missing rib sections
  • Keep the belt dry and free of oil

Specifications

Brand Crown Automotive
Part number CRO53010257
Position Accessory Drive
Length 79.0 inch
Ribs 6
Engine 2.5L 4 cylinder without A/C and with power steering
Fitment type Direct Fit

Vehicle fitment

It fits the 2016–2018 Fiat 500X; the 1997–2000 Jeep Cherokee (XJ) in SE trim; the 2018 Jeep Compass; the 2015–2018 Jeep Renegade; the 1997–2002 Jeep Wrangler (TJ); and the 1994–1995 Jeep Wrangler (YJ).

It does not fit the Wrangler JK or the Grand Cherokee. Confirm that the engine matches your vehicle and confirm your year, model and trim before ordering.

Installation notes

Check the belt routing against the engine’s under-hood diagram before fitting, since a 6-rib belt must seat correctly on every pulley.

What’s included

The package is the belt only, so check for other parts you need before starting the installation.

SKU: CRO53010257 Categories: , ,

Fitment

VehicleYearsTrims
Fiat 500X2016–2018Easy, Lounge, Pop, Trekking, Trekking Plus
Jeep Cherokee (XJ)1997–2000SE
Jeep Compass2018Latitude, Limited, Sport, Trailhawk
Jeep Renegade2015–201875th Anniversary, Altitude, Dawn Of Justice, Latitude, Limited, Sport, Trailhawk
Jeep Wrangler (TJ)1997–2002SE, Sahara, Sport, X
Jeep Wrangler (YJ)1994–1995Renegade, Rio Grande, S, SE, Sahara

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

How long is this serpentine belt?

The belt is 79.0 inch long with 6 ribs. It is for a 2.5L 4-cylinder engine without A/C and with power steering.

Will it fit a 2000 Jeep Cherokee SE?

Yes. It fits 1997–2000 Jeep Cherokee (XJ) in SE trim. Confirm your vehicle's year, model and trim before ordering, and check that the engine is a 2.5L 4-cylinder.

Does it fit a Jeep Wrangler JK?

No. It fits the 1994–1995 Wrangler (YJ) and 1997–2002 Wrangler (TJ) models, and no JK models are covered by this belt. Confirm your year, model and trim before ordering.

Should the tensioner be replaced with the belt?

Inspect it while the belt is off. A tensioner that is sticky, noisy or has lost spring tension can cause a new belt to slip or wear quickly. Replace it if it does not move smoothly through its range, since a failed tensioner can throw the belt off the pulleys.

How do I tell whether the belt is worn?

Look for cracks across the ribs, shiny or glazed grooves, missing chunks and fraying edges. A squeal on startup or under load, especially in wet conditions, can also point to wear or slipping. Replace the belt when any of these appear rather than waiting for a failure.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon