Overview
The Omix-Ada 17725.02 is a sending unit gasket for 4 cylinder Jeep Willys and CJ models from 1955 to 1966. Omix-Ada builds it to the original specifications as a direct OE replacement.
It covers a broad range of models, including the CJ3, CJ5, CJ6, Dispatcher, DJ3, F4, FC150, FC170, Utility and Sedan Delivery entries. Omix-Ada provides a limited five year warranty on it.
Key features
- Gasket for 4 cylinder engine applications
- Direct OE replacement built to original specifications
- Fits a wide range of 1955-1966 Jeep CJ, Willys and FC models
- Limited five year warranty from Omix-Ada
Replacing a sending unit gasket
A sending unit gasket sits between the sending unit and the engine body, sealing the threaded joint so oil or fluid does not weep out around it. Over time the gasket can harden, flatten or tear, and a slow seep at this joint is often the first sign it has failed. Replacing it whenever the sender is removed is a sensible habit, because the part costs little compared with the labor of pulling the unit a second time.
Before fitting the new gasket, clean the mounting surface of old material and any oil residue, and check that the sender threads are clean and undamaged. Seat the gasket flat without folds or twists. Tighten the sender only to a snug fit, since overtightening can crush a new gasket and cause the leak it was meant to stop. Run the engine to operating temperature afterward and look at the joint again.
- Clean both mating surfaces before installing the new gasket
- Seat the gasket flat with no folds or twists
- Inspect the sender threads for damage
- Recheck for seepage once the engine is warm
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17725.02 |
| UPC | 804314008826 |
| Engine | 4 cylinder |
| Type | Sending unit gasket |
| Warranty | Five year limited warranty |
Vehicle fitment
It fits 1959-1960 Jeep CJ3, CJ5 and CJ6 (Base) and DJ3 (Base); 1961-1966 Dispatcher (Base); 1957-1958 F4 (Base); 1958-1966 FC150 (Base); 1964-1966 FC170 (Base); 1961-1962 Utility (Base); 1955 Willys 1-Ton; 1955-1958 Willys CJ-3 and CJ-5; 1956-1958 Willys CJ-6 and DJ-3; and 1955 Willys Sedan Delivery.
It does not fit the Willys CJ-2 or CJ-7. The 17725.01 gasket covers CJ-2 and CJ-3 models instead. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
The sending unit gasket is the item in this package. Check the package contents against your installation before starting.









