Overview
The Crown Automotive 53000575 is a fuel tank sending unit gasket for the 1987–1990 Jeep Wrangler (YJ) in Base, Islander, Laredo, S, Sahara and Sport trims.
It is designed for a 15 gallon tank with an out-of-tank pump, and for 2.5L EFI or 4.2L engines. Confirm the engine and tank setup on your vehicle before installing.
Key features
- Fuel tank sending unit gasket
- Fits 2.5L EFI or 4.2L engines
- Notes reference a 15 gallon tank out pump
- Fitment list covers 1987–1990 Wrangler YJ trims
Gasket fit checks before installing
A sending unit gasket seals the opening between the sending unit flange and the tank, so it must be flat and undamaged for fuel and vapor to stay contained. On 1987–1990 Wrangler YJ models, the gasket often sits in an area that sees road spray and engine heat, which can dry and harden the material over time. Replace it whenever the sending unit comes out, rather than reusing a gasket that has taken a set.
Before ordering, confirm the engine and tank setup, since the sending unit and gasket must match the system on your vehicle. Clean the tank flange thoroughly, and check it for bends that could prevent a good seal. Work away from ignition sources, keep the area ventilated, and avoid tightening the sending unit to the point of distorting the gasket.
- Clean dried gasket material from the flange
- Check the flange for flatness before fitting
- Do not reuse a flattened gasket
- Confirm the engine and tank setup before ordering
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 53000575 |
| UPC | 848399016680 |
| Engine | 2.5L EFI or 4.2L engine |
| Tank | 15 gallon tank out pump |
Vehicle fitment
The manufacturer fitment list covers the 1987–1990 Jeep Wrangler (YJ) in Base, Islander, Laredo, S, Sahara and Sport trims.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for other YJ years, TJ and JK models.
What’s included
Gasket only.









