Select your vehicle

Crown Automotive Fuel Sending Unit O-Ring Seal – J0941521

Crown Automotive

$8.52In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 2:20 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Crown Automotive J0941521 rubber fuel sending unit O-ring seal
  • Fits 1969–1988 Jeep CJ5, CJ6, CJ7, J10, J20 and Scrambler models
  • Part number J0941521, UPC 848399055726

Description

Overview

The Crown Automotive J0941521 is a rubber fuel sending unit O-ring seal for Jeep CJ5, CJ6, CJ7, J10, J20 and Scrambler models from 1969 to 1988. It replaces the original seal on the fuel sending unit, so confirm fit against the year and body style.

It is a direct fit for the vehicles below. Confirm your year, model and body style before ordering.

Key features

  • Rubber O-ring construction
  • Designed as a fuel sending unit O-ring seal
  • It is a direct fit for the Jeep CJ, J10, J20 and Scrambler models covered below.
  • Crown Automotive part number J0941521

Replacing a sending unit seal

The sending unit seals the fuel tank opening and keeps fuel vapor and moisture out of the tank. A hardened or flattened O-ring can allow slow weeping at the sending unit, which often shows up as a fuel smell or a film of fuel around the tank top.

When replacing the seal, clean the mating surface and remove old rubber fully before setting the new O-ring. Lubricate lightly with fuel-safe grease only if the service manual calls for it. Avoid over-tightening the retaining ring, since that can pinch the new seal and cause leaks. Sending units on older Jeeps often age together, so a worn O-ring is a good time to inspect the gauge wiring and tank strap condition.

  • Inspect the tank flange for corrosion
  • Dispose of old fuel and seals properly
  • Check the gauge reading after reassembly

Specifications

Brand Crown Automotive
Part number J0941521
UPC 848399055726
Material Rubber
Type Fuel sending unit O-ring seal

Vehicle fitment

It fits 1969–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade); 1969–1975 Jeep CJ6 (Base); 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade); 1981–1988 Jeep J10 (Base); 1981–1988 Jeep J20 (Base); and 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).

Wrangler YJ, TJ and XJ models and years outside the ranges above are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rubber O-ring seal, part number J0941521.

SKU: CROJ0941521 Category:

Specification

Shipping weight 0.20 lbs
Package dimensions 7.00 × 5.00 × 0.10 in
brands

Fitment

VehicleYearsTrims
Jeep CJ51969–1983Base, Golden Eagle, Laredo, Limited, Renegade
Jeep CJ61969–1975Base
Jeep CJ71976–1986Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade
Jeep J101981–1988Base
Jeep J201981–1988Base
Jeep Scrambler1981–1985Base, Laredo, Renegade, SL, SR

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What is the Crown Automotive J0941521?

The Crown Automotive J0941521 is a rubber fuel sending unit O-ring seal sold under Crown Automotive part number J0941521. It is a replacement seal for the fuel sending unit on the Jeep CJ, J10, J20 and Scrambler models below.

Will the J0941521 fit a Jeep Wrangler YJ?

No. It fits 1969–1983 CJ5, 1969–1975 CJ6, 1976–1986 CJ7, 1981–1988 J10 and J20, and 1981–1985 Scrambler models. Wrangler YJ models are not part of this fit, so confirm your vehicle's year, model and trim before ordering.

Is the J0941521 a direct fit part?

It is a direct fit, meaning it replaces the original seal on the models above. Installation steps and tools are not covered here, so follow your vehicle's service manual.

How do I know the sending unit seal is leaking?

A fuel odor near the rear of the tank, a damp area around the sending unit or fuel stains on the tank top point to a leaking seal. Inspect the seal area carefully, and correct the leak before driving the vehicle.

Should the O-ring be replaced with the sending unit?

Replacing the O-ring during sending unit service is a practical choice, since the seal can harden while the unit stays in place. Confirm the new seal's fit against your year and model first.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon