Overview
The Crown Automotive 52127833 is a rubber fuel sender unit gasket with eight screw holes. Screws are not included.
Key features
- Rubber construction
- Eight screw holes around the gasket
- Screws not included
- Crown Automotive part number 52127833
- Direct Fit designation
Before fitting a sender gasket
A fuel sender gasket seals the sender assembly where it meets the top of the tank, keeping fuel and vapor from escaping past the mounting flange. Because it sits between metal and fuel, a gasket that has hardened, cracked or been pinched during an earlier removal often seeps. Inspect both sealing surfaces for dirt, old rubber and scoring before setting the new gasket in place.
Replacing the gasket whenever the sender comes out is a common practice, since removal can distort even an intact seal. Clean the mating surfaces with a non-abrasive pad and avoid stretching the rubber over the flange. Tighten the fasteners evenly in a crisscross pattern so the gasket compresses flat, then check for leaks once the system is back under pressure.
- Check the old gasket for hardening, cracks or flattened spots
- Replace the locking ring seal if it looks worn
- Work away from open flames and sparks during fuel system service
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52127833 |
| UPC | 848399016468 |
| Material | Rubber |
| Screw holes | 8 |
| Included hardware | Screws not included |
Vehicle fitment
No vehicle is named for this gasket, so fitment is not confirmed. Check the fuel sender unit’s bolt pattern and your vehicle’s specifications before fitting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The gasket has eight screw holes and screws are not included, so fasteners need to be sourced separately. Work on the fuel system only with the tank and lines depressurized and away from ignition sources.
What’s included
The gasket only.
Not included: Screws for the eight screw holes.












