Overview
The Omix-Ada 17609.10 is a replacement turbo-type muffler for 1972 to 1978 Jeep CJ5, CJ6 and CJ7 models. It is built to original specifications and made of aluminized steel with 2 inch inlet and outlet tubes.
The inlet is offset and the outlet is centered, so check that position against the exhaust system you are replacing.
Key features
- Turbo-type muffler design
- Aluminized steel construction
- 2 inch inlet and 2 inch outlet tubes
- Offset inlet with centered outlet
- Direct OE replacement built to original specifications
Muffler fit and exhaust flow
A muffler does two jobs on an older Jeep: it reduces noise and it routes exhaust away from the body. Because the inlet is offset and the outlet centered, the muffler must be oriented correctly to line up with the tailpipe and the pipe running from the engine. Dry-fit the new muffler before tightening anything so the hangers and clamps can be positioned without strain.
Aluminized steel resists rust better than plain steel, but road salt and moisture still wear down the body and seams over time. Inspect the old muffler for pinholes, rust at the seams and loose hangers. When replacing the muffler, check the pipe ends too, because a worn connection can leak even with a new muffler installed.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17609.10 |
| Material | Aluminized steel |
| Muffler type | Turbo |
| Tube size (inlet/outlet) | 2 inches / 2 inches |
| Inlet location | Offset |
| Outlet location | Centered |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1972 to 1978 Jeep CJ5 (Base, Golden Eagle, Renegade), the 1972 to 1975 CJ6 (Base) and the 1976 to 1978 CJ7 (Base, Golden Eagle, Renegade).
The list does not cover CJ model years after those named, or any Wrangler or Cherokee models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wear eye protection when cutting or unbolting the old pipe, since rusted exhaust parts can release debris.
What’s included
Check the package contents against your installation before starting, and have clamps and hangers ready.










