Overview
The Crown Automotive CROJ4004109 is a right exhaust manifold stud for 5.0L-304, 5.9L-360 and 6.6L-401 V8 engines. Two are required per installation.
It fits 1972-1991 Jeep SJ Cherokee and Wagoneer models, CJ5, CJ6 and CJ7, Commando, and J-series trucks. It is a right-side stud, so confirm which side of the engine your manifold uses before ordering. It is a direct-fit part.
Key features
- Right-side exhaust manifold stud
- Two required per installation
- Engine applications: 5.0L-304, 5.9L-360 and 6.6L-401 V8
- Crown Automotive part number CROJ4004109
- Fits 1972-1991 Jeep SJ, CJ and J-series models
Stud installation basics
An exhaust manifold stud threads into the cylinder head and carries the clamping load that keeps the manifold sealed against the head. Because the stud sits at the head, a loose or damaged thread can cause a leak that shows up as a ticking sound when the engine is cold, so the threads deserve a careful look before fitting.
Clean the threads in the head and apply a light coat of anti-seize where the procedure calls for it. Tighten the nuts evenly and in the correct sequence, and recheck them once the engine has reached operating temperature. Heat cycles can loosen nuts over time, so a second check after the first few drives is a good habit.
Keep the right-side stud matched to the right-side manifold, and avoid mixing studs from different engine families. Inspect the stud for bent or stretched sections before reuse, and replace any that show thread damage.
- Clean and chase threads in the head
- Use anti-seize only where the procedure calls for it
- Tighten nuts evenly and in sequence
- Recheck nuts after the engine warms up
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CROJ4004109 |
| Position | Right |
| Quantity required | 2 |
| Engine applications | 5.0L-304, 5.9L-360, 6.6L-401 V8 |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1983 Jeep Cherokee (Wide Track Chief), 1974-1983 Jeep Cherokee (SJ), 1972-1983 Jeep Wagoneer (SJ), 1984-1991 Jeep Grand Wagoneer (SJ), 1972-1973 Jeep Commando, 1972-1981 Jeep CJ5, 1972-1975 Jeep CJ6, 1976-1981 Jeep CJ7, 1972-1973 Jeep J-2500, J-2600, J-4500, J-4600, J-4700 and J-4800, and 1974-1988 Jeep J10 and J20.
Not covered: Cherokee XJ and later Cherokee generations, Wrangler models, Grand Cherokee ZJ or WJ, or CJ7 years after 1981. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm whether nuts, gaskets and hardware are needed for your manifold before ordering.
Not included: Nuts and gaskets, if your manifold requires them.









