Overview
The 18203.04 is a rear heavy-duty replacement shock for Jeep CJ5 and CJ6 models, with Willys CJ-5 and CJ-6 applications also covered. It is a stock length, gas charged direct fit shock with a 0 in. lift or drop, so it replaces the original without changing height.
When comparing against your original shock, use part number 18203.04, since several Omix-ADA rear shocks differ mainly by fitment and length. Fitment is the deciding factor for which vehicles this shock suits.
Key features
- Heavy-duty replacement shock for rear position
- Stock length design with 0 in. lift or drop
- Gas charged damping
- Direct fit for the listed CJ5, CJ6 and Willys models
Rear shock wear check
On a CJ rear axle, a shock controls leaf spring movement and keeps the rear from hopping over washboard and rough ground. When a rear shock wears, the axle can bounce after bumps, the rear may dip under braking, and tire wear can appear along the outer edges. Check the mounting eyes and bushings at the same time, since a worn bushing can mimic a bad shock.
Replacing both rear shocks together keeps damping balanced and helps the axle track straight. Before installing, compare the old shock’s length with the new one so the stock height stays consistent. Look for leaks around the shaft seal and for dents in the body, which can bind the piston and shorten its life.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18203.04 |
| UPC | 804314047146 |
| Position | Rear |
| Shock series | Replacement |
| Fitment type | Direct fit |
| Lift or drop | 0 in. |
| Charge type | Gas charged |
| Length | Stock length |
Vehicle fitment
It fits 1959–1960 and 1966–1975 Jeep CJ5 (Base, Renegade), 1959–1960 and 1966–1975 Jeep CJ6 (Base), 1955–1958 Jeep Willys CJ-5 and 1956–1958 Jeep Willys CJ-6.
The list does not include CJ7 or Scrambler models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The box holds one rear replacement shock. Check the hardware and bushings against your installation before starting.









