Overview
The Omix-ADA gas tank vent hose, part number 17741.01, has an 11/16 inch inside diameter and a 1-1/8 inch outside diameter. It is built to original specifications as a replacement vent hose.
No vehicles are named for this part, so confirm fit before installing.
Key features
- 11/16 inch inside diameter
- 1-1/8 inch outside diameter
- Direct OE replacement part
- Built to original specifications by Omix-ADA
- Limited five year warranty from Omix-ADA.
Vent hose function and care
A gas tank vent hose lets air move into and out of the fuel tank as fuel is used and the level changes. Without a clear vent path, the tank can build pressure or pull a vacuum, which can affect fuel flow and make the tank harder to fill. The vent line also carries fuel vapor, so it must stay sealed at every connection.
Routing matters as much as the hose itself. Keep the line clear of heat sources such as exhaust parts, avoid sharp bends, and make sure it does not rest against moving components. When comparing a replacement, match the inside and outside diameter to the existing hose and check the clamp sizes before fitting.
Check the vent hose during routine service. Look for kinks, cracking, soft spots and hardening, and inspect both ends for seepage. Vent lines are often replaced along with filler hoses, since they share the same fuel system exposure. After replacing, confirm the hose sits clear of the frame and does not pinch when the body moves.
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17741.01 |
| UPC | 804314035471 |
| Inside diameter | 11/16 inch |
| Outside diameter | 1-1/8 inch |
| Warranty | Covered by a limited five year warranty from Omix-ADA. |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before installing. No make, model or year is named for this hose.
Compare both diameters with your original vent hose before use.
Confirm your vehicle’s year, model and trim before ordering.
