Overview
The Omix-ADA 17740.01 is a fuel filler hose for the 1970–1975 Jeep CJ5 and CJ6. Omix-ADA builds it to original specifications as a direct OE replacement, so it is meant to match the factory hose it replaces.
It has a side hole for a vent. The outside diameter is 2-5/8 inch and the inside diameter is 2-3/16 inch, so compare those measurements with your original hose. This part carries a limited five year warranty.
Key features
- Built to original specifications as a direct OE replacement
- Hole on the side for a vent
- 2-5/8 inch outside diameter
- 2-3/16 inch inside diameter
- Limited five year warranty
Signs a filler hose needs replacing
A filler hose takes fuel and vapor from the filler neck into the tank, so it is exposed to fuel, heat and road debris every day. Check the hose for cracks, swelling, soft spots or a strong fuel smell around the filler area. Any of these means the hose is due for replacement, even if no drip has appeared yet. Look at the clamps at both ends as well, because a loose clamp can let fuel seep out under pressure.
A vent port on the side of the hose must stay open and connected to the vent system. If the vent line is kinked or blocked, fuel can fail to flow freely into the tank and the system can build pressure. Route the new hose so it does not rub against the frame or body, and secure it away from moving parts.
- Inspect for cracks and swelling
- Check both clamps for looseness or corrosion
- Confirm the vent connection is clear
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17740.01 |
| UPC | 804314021269 |
| Outside diameter | 2-5/8 inch |
| Inside diameter | 2-3/16 inch |
| Vent | Hole on side for vent |
| Warranty | Limited five year warranty |
Vehicle fitment
It fits 1970–1975 Jeep CJ5 Base and Renegade trims and 1970–1975 Jeep CJ6 Base trim.
The list does not include CJ7 or later Jeep models, or any Wrangler. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is one filler hose. Confirm whether clamps or fittings are needed before installing.









