Overview
The Omix-ADA 17740.08 is a gas filler hose with a 1-3/8” inside diameter. It is a direct OE replacement for Jeep vehicles, built to original Jeep specifications, and it carries a limited five year warranty from Omix-ADA.
The hose comes with one clamp and is listed with a length of 13 with no unit stated. Measure your original filler hose before fitting, and check that the diameter and length match the vehicle you are working on.
Key features
- Direct OE replacement design, built to original Jeep specifications
- 1-3/8” inside diameter
- Includes one clamp
- Length of 13 (confirm the unit when measuring)
Measuring and matching the hose
Original-style filler hoses are sized to the filler neck and tank nipple, so matching the inside diameter is the first check. Before ordering, measure the old hose’s inside opening and its overall length, noting any bends or molded shape. Replacement hoses rarely match a worn one exactly, and a small difference can matter at the clamp.
Clamps are the other half of the job. The original clamp may be rusted or stretched, and reusing it can let the joint weep fuel. Plan on a fresh clamp if the old one is worn. Tighten both clamps evenly and check for leaks after the first fill and after a short drive.
- Measure the old hose before ordering
- Compare molded bends and routing
- Replace worn or rusted clamps
- Check both joints for seepage after the first fill
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17740.08 |
| UPC | 804314138684 |
| Inside diameter | 1-3/8” |
| Length | 13 (no unit given) |
| Included hardware | One clamp |
| Warranty | Limited five year warranty from Omix-ADA |
Vehicle fitment
It is built to original Jeep specifications. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One gas filler hose and one clamp.









