Overview
The Omix-ADA gas filler vent hose, part number 17741.06, is a replacement hose with a 3/4 inch inside diameter, supplied with one clamp. It is built to original specifications by Omix-ADA.
Key features
- 3/4 inch inside diameter
- One clamp included
- Built to original specifications by Omix-ADA
- Omix-ADA provides a limited five year warranty on this hose.
Before you buy
A gas filler vent hose carries vapor between the fuel tank and the filler neck area, letting air move as the fuel level changes. A vent hose that is cracked, soft or kinked can restrict that airflow or let fuel odor escape, which is why it is worth inspecting when you work on the filler area. Check the hose for cracks, hardening and swelling at both ends where it meets its fittings.
When you replace the hose, pay attention to the clamp and the fittings. Clamps tend to lose tension over time, so a fresh clamp at each end is a sensible step. Route the hose away from heat sources and moving parts, and keep it clear of sharp edges so it does not chafe. Because fuel system parts are often replaced together, inspect the filler neck and nearby lines at the same time.
- Look for cracks, stiffness or soft spots
- Replace clamps that have lost tension
- Keep the hose clear of heat and moving parts
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17741.06 |
| UPC | 804314138691 |
| Inside diameter | 3/4 inch |
| Included hardware | One clamp |
| Warranty | Omix-ADA provides a limited five year warranty on this hose. |
What’s included
One clamp is included with the hose.
Vehicle fitment
It is a direct fit replacement. Confirm fit for your vehicle’s year, model and trim before ordering, and measure your existing vent hose’s inside diameter to compare with this hose’s 3/4 inch size.
Measure your existing vent hose’s inside diameter as well, since this hose is listed at 3/4 inch.
Confirm your vehicle’s year, model and trim before ordering.









