Overview
The MTS Company YJFH-1 is a fuel tank fill hose for the 1987–1995 Jeep Wrangler (YJ). It is a replacement style hose and a direct fit for the YJ.
A fill hose carries fuel from the filler neck to the tank, so a cracked or soft one needs replacing. Use YJFH-1 when you are replacing the fill line on a YJ.
Key features
- Replacement style fuel tank fill hose
- Direct fit listing for the 1987–1995 Jeep Wrangler (YJ)
- Fitment list covers Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims
- Sold under MTS Company part number YJFH-1
Before you replace the fill hose
Fill hoses sit under constant fuel exposure and temperature swings, so the material wears over time. Look for hardening, surface cracks, soft spots or a fuel odor near the filler neck. Those signs mean the hose should come out of service even before it leaks. Because the hose carries fuel from the filler neck to the tank, a failure can drip fuel near hot exhaust parts, which makes early replacement worth the time.
When you order a replacement, match the connection ends and routing of the original hose rather than the length alone. Old clamps often weaken or corrode after years of service, so replace them when the hose comes off. Keep the filler neck area clean during the job, then run the engine briefly and check each joint for seepage.
- Check for cracks, stiffness and fuel smell
- Replace worn clamps along with the hose
- Inspect the filler neck seal after installation
Specifications
| Brand | MTS Company |
|---|---|
| Part number | YJFH-1 |
| UPC | 700006405884 |
| Part type | Fuel tank fill hose |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
The list does not include Wrangler TJ or later models, or other Jeep models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is one fuel tank fill hose, part number YJFH-1. Confirm whether clamps or fill neck hardware are needed for your installation before starting.









