Overview
The Omix-ADA 16512.55 is a steel Dana 30 dust shield for the 1977–1986 Jeep CJ5, CJ7 and Scrambler.
A dust shield sits behind the front wheel end and helps keep road debris away from the hub and brake area. A bent or rusted shield is a common reason to replace it when the front axle is apart.
It is a steel direct OE replacement built to original specifications for Dana 30 axles.
On a CJ front axle the dust shield bolts behind the hub and keeps debris from the brake area. Over time shields rust or get bent by trail damage, and a damaged one can rub the rotor. Omix-ADA lists only that the 16512.55 is steel and fits the Dana 30, with no thickness or finish given, so check the mounting holes against your old shield. The vehicle list spans the CJ5 from 1977 to 1983, the CJ7 from 1977 to 1986 and the Scrambler from 1981 to 1985, so it suits the classic CJ-series trucks.
Key features
- Steel construction
- For the Dana 30 axle
- Direct OE replacement.
- Built to the original specifications
- Limited five year warranty from the manufacturer
Rust and trail damage
A front dust shield on a CJ sits in the path of mud, rocks and water thrown from the tire. Surface rust usually starts at the lower edge and at the seams where the metal is folded. Left alone, rust can work through the metal and let debris reach the brake area.
On a CJ with a Dana 30 front axle, the shield is one of the parts that is easiest to replace while the hub is off. Check the bolt holes for elongation and the brake backing area for scoring from debris. Brake dust and grease can build up behind a shield with a hole, so a quick cleaning during service keeps the area easier to inspect.
- Look for rust at the lower edge and seams
- Check for rubbing on the rotor or backing plate
- Replace bent shields rather than hammering them straight
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16512.55 |
| UPC | 804314044497 |
| Part type | Dust shield |
| Material | Steel |
| Axle | Dana 30 |
| Warranty | Limited five year warranty. |
Vehicle fitment
It fits these vehicles:
- 1977–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
- 1977–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade)
- 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
It fits the CJ5, CJ7 and Scrambler years shown. Check fit against your vehicle’s year, model and trim before ordering.
Installation notes
Dust shields mount at the front wheel end and are easiest to reach with the spindle and hub off the axle. Mounting hardware is not part of this package, so have fasteners ready.
What’s included
One dust shield, part number 16512.55.
Not included: mounting hardware, bearings and seals.









