Overview
The Omix-ADA 16749.09 is a brake caliper bolt that serves as a caliper guide pin, for the 1990–2001 Jeep Cherokee, 1993–1998 Grand Cherokee and Wranglers built 1990–1995, 1997–2006 and 2004–2006.
A guide pin, also called a slide pin, lets the caliper move as the pads wear, so it is handled as a wear item along with the caliper bushings. The position is front. The part is a direct OE replacement built to original specifications, with a limited five year warranty. Guide pins are usually replaced in pairs, since each caliper has two and the bushings around them wear together. Confirm the axle before ordering.
Key features
- Brake caliper bolt categorized as a caliper guide pin
- Short description says front or rear
- Position field lists front
- Built to original specifications as a direct OE replacement
- Limited five year warranty
Guide pins and bushings
The guide pin is the part the caliper slides on, and it works with the caliper bushings around it. When the pin corrodes or binds, the caliper cannot move freely, which can cause pads to drag, wear unevenly or overheat. Pins that look bright and move smoothly are usually in good shape, while dull, pitted or stiff pins need attention.
When the caliper is off, pull the pin, clean off rust and old grease, and check the boot for tears. Inspect the bushing bore for wear, and replace the bushings with the pin when they show damage. Use only lubricant made for brake slides, and keep it away from the pad friction surfaces. Replacing pins in pairs for each caliper keeps the slide action even.
- Clean rust and old grease from the pin
- Check the boot or seal for tears
- Replace bushings that show wear with the pin
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16749.09 |
| UPC | 804314033439 |
| Part type | Brake caliper bolt / guide pin |
| Use | Front or rear |
| Position field | Front |
| Fit type | Direct fit |
| Warranty (stated by Omix-ADA) | Covered by a limited five year warranty |
Vehicle fitment
It fits the 1990–2001 Jeep Cherokee, the 1993–1998 Jeep Grand Cherokee and Jeep Wranglers from 1990–1995, 1997–2006 and 2004–2006.
Confirm the axle before ordering. Years outside the ranges above are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Guide pins are normally replaced with their bushings, so inspect the bushings in the same caliper when installing this part. No other installation details are given for the 16749.09. Check that the pin slides smoothly through the bushings after assembly; a pin that binds will cause the caliper to drag.
What’s included
- One brake caliper bolt or guide pin, part 16749.09. Confirm the quantity needed for each caliper before ordering.
Not included: the caliper, bushings or brake pads.









