Overview
The Omix-ADA back up lamp assembly, part number 12406.01, is a replacement reverse light assembly with a clear lens, made for the passenger or driver side. It is built to original equipment specifications for Jeep. Confirm fit for your vehicle’s model year, chassis and trim before ordering.
Key features
- Clear lens
- Passenger or driver side
- Built to original equipment specifications
- Backed by a limited five year warranty
Replacing a reverse lamp
A back up lamp assembly carries the reverse light, and it is often mounted in the tail section or rear bumper area. The lamp typically houses a bulb, a lens and a gasket that keeps moisture out. Because it sits exposed to road spray and sun, the lens can cloud or crack over time, and the gasket can dry out.
Before installing, match the mounting bolts and the wiring connector to the lamp you are removing. Clean the mounting surface and replace the gasket if it is damaged to keep the lamp sealed. After installation, test the reverse light with the transmission in reverse and check that the lamp works with the ignition on.
- Match the wiring connector before installing
- Replace a damaged gasket
- Test the reverse light after fitting
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 12406.01 |
| UPC | 804314019518 |
| Lens | Clear |
| Position | Passenger or driver side |
| Warranty | Limited five year warranty |
Vehicle fitment
The assembly is made for Jeep vehicles generally. Confirm fit for your model year, chassis and trim, and compare it with your current lamp.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One back up lamp assembly. Check the delivery against your installation steps, including any bulb, wiring or hardware needs.









