Overview
The IPF Back-up Light Kit, part number 8161 from ARB 4×4 Accessories, is a single rectangular reverse light with a three-position switch, weatherproof connectors and a snap-together wiring loom with relay. It is universal fit, so no year, make or model applies. Check the mounting space on your vehicle before buying.
IPF engineers its lighting systems around real-world conditions, aiming to focus light ahead of the vehicle for better visibility and less driver fatigue.
Key features
- Rectangular single light
- Three-position switch
- Weatherproof connectors
- Snap-together wiring loom and relay included
- Universal fit, not tied to one vehicle
Wiring and installation tips
A reverse light comes on when the transmission is in reverse, giving you a clear view behind the vehicle at night or in dim camp areas. On the trail it helps when backing up to a trailer, a winch point or a tent site. A relay in the loom carries the current to the light, which keeps the load off the switch and the factory wiring.
Before drilling or running any wire, plan the route from the light to its power source. Keep the harness clear of exhaust heat, moving suspension parts and sharp edges, and use grommets wherever it passes through sheet metal. Seal every connector against water, since moisture is the most common cause of a reverse light that flickers.
Test the finished circuit before you close up the panels. Cycle the switch through all three positions and confirm the light responds with the vehicle in reverse. A quick check now is easier than tracing a fault later in the bush.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 8161 |
| UPC | 4951499000148 |
| Light shape | Rectangle |
| Quantity | 1 light |
| Switch | Three-position |
| Connectors | Weatherproof |
| Wiring | Snap-together loom with relay |
| Fitment | Universal Fit |
Vehicle fitment
Universal fit means the kit is not tied to a year, make or model. Check the mounting location and wire routing on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit comes with a relay and snap-together wiring loom, so plan the wire route before assembling it. Local rules on reverse and auxiliary lighting apply, so check them before fitting.
What’s included
One rectangular light with weatherproof connectors, a snap-together wiring loom, a relay and a three-position switch.












