Overview
The Omix-ADA 19105.01 is a wiper pivot nut for Jeep CJ5, CJ6, CJ7 and Scrambler vehicles. The nut fastens the wiper arm to its pivot, so it is part of the wiper arm mounting.
The part is built to original specifications and comes with a limited five year warranty.
Key features
- Wiper pivot nut for the wiper arm pivot
- Fits CJ5, CJ6, CJ7 and Scrambler models
- Built to original specifications
Tightening the pivot nut
The pivot nut holds the wiper arm firmly on its shaft, so it carries constant side load as the blade sweeps. Snug it until the arm stops moving on the shaft, then stop. Overtightening can strip threads or crack the pivot housing, while a nut that is too loose lets the arm walk out of position. Check the nut after the first few trips with the wipers running, since it can settle as the arm seats.
Inspect the threads and the arm’s mounting surface whenever the nut is removed. Dirt, corrosion or a worn shaft can keep the nut from clamping evenly, even when the new nut is correct. Clean both surfaces and apply a light coat of appropriate protectant before reassembly. If the arm still moves after tightening, the shaft or the arm itself may be damaged and should be inspected.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 19105.01 |
| UPC | 804314028763 |
| Part type | Wiper pivot nut |
Vehicle fitment
Fitment comes from the manufacturer fitment list: 1968–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), 1968–1975 Jeep CJ6 (Base), 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
The list does not include Wrangler models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Wiper pivot nut, as named by the manufacturer.
Not included: Wiper arms and blades.









