Overview
The Fox Racing Shox Nitrogen Filler Gauge is a Shrader-style gauge that reads pressure from 0 to 600 psi. It is a shock absorber tool and is universal fit, so it is not tied to a particular vehicle.
Use it to check or set nitrogen pressure in a nitrogen-charged shock absorber. The gauge pairs a Shrader-style fitting with a 0 to 600 psi scale, so confirm that the range suits the shock you are servicing before use.
Key features
- Shrader-style fitting
- 0 to 600 psi pressure range
- Nitrogen filler gauge for shock absorber service
- Universal fit, not vehicle-specific
Checking nitrogen pressure safely
Nitrogen-charged shocks hold gas under high pressure, so read the gauge with the valve closed and the shock at the temperature it was set at. Gas pressure changes with temperature, so a reading taken after a hard day on the trail can be higher than a cold reading. Compare readings at the same temperature before deciding to add or release gas. Use a gauge that is kept dry and free of oil.
Wear eye protection when connecting the gauge, and keep the valve core and cap clean to prevent leaks. Check the shock body for oil seepage or dents, since a damaged shock may not hold a set pressure even when the gauge reads correctly. Recheck pressure after the first few drives, because small leaks can change the reading over time.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Tool type | Nitrogen filler gauge |
| Connection | Shrader style |
| Pressure range | 0 to 600 psi |
| UPC | 70000368706 |
| Fitment | Universal fit |
Vehicle fitment
This is a universal tool and is not vehicle-specific. Match the 0 to 600 psi range and the Shrader-style connection to the shock you are servicing, and follow that shock’s pressure specifications.
Confirm the shock’s valve type and pressure requirement before connecting the gauge.
Installation notes
Connect the Shrader-style end to the valve, then read the gauge before adding or releasing any gas. Pressure settings should come from the shock manufacturer rather than from the gauge range alone.
What’s included
One Nitrogen Filler Gauge from Fox Racing Shox with the Shrader-style fitting described above.
Not included: Check the valve connection on your shock against the gauge before starting, and gather any adapter you need.






